UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, DC  20549
 
FORM 10-Q
 
x    QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended June 27, 2009
 
OR
 
¨    TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from           to           .
 
Commission File Number:  333-124824

RBC Bearings Incorporated
(Exact name of registrant as specified in its charter)

Delaware
 (State or other jurisdiction of incorporation or organization)
95-4372080
(I.R.S. Employer Identification No.)
   
One Tribology Center
Oxford, CT
(Address of principal executive offices)
06478
(Zip Code)
 
(203) 267-7001
(Registrant’s telephone number, including area code)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes x  No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Date File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes ¨  No ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of  “large accelerated filer,”  “accelerated filer” and  “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer  þ           Accelerated filer  ¨
Non-accelerated filer  ¨  (Do not check if a smaller reporting company)   Smaller reporting company  ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes ¨  No x
 
As of July 27, 2009, RBC Bearings Incorporated had 21,706,256 shares of Common Stock outstanding.


 
 

 

TABLE OF CONTENTS
 
Part I -  FINANCIAL INFORMATION
3
   
ITEM 1.  Unaudited Consolidated Financial Statements
3
ITEM 2.  Management’s Discussion and Analysis of Financial Condition and Results of Operations
12
ITEM 3.  Quantitative and Qualitative Disclosures About Market Risk
17
ITEM 4.  Controls and Procedures
18
 Changes in Internal Control over Financial Reporting
18
   
Part II - OTHER INFORMATION
19
   
ITEM 1.  Legal Proceedings
19
ITEM 2.  Unregistered Sales of Equity Securities and Use of Proceeds
19
ITEM 3.  Defaults Upon Senior Securities
20
ITEM 4.  Submission of Matters to a Vote of Security Holders
20
ITEM 5.  Other Information
20
ITEM 6.  Exhibits
20

 
2

 

PART I. FINANCIAL INFORMATION

ITEM 1. Financial Statements
 
RBC Bearings Incorporated
Consolidated Balance Sheets
(dollars in thousands, except share and per share data)

   
June 27,
2009
   
March 28,
2009
 
 
 
(Unaudited)
       
ASSETS
           
Current assets:
           
Cash and cash equivalents
  $ 38,698     $ 30,557  
Short-term investments
    4,730        
Accounts receivable, net of allowance for doubtful accounts of $1,536 at June 27, 2009 and $1,571 at March 28, 2009
    49,178       63,692  
Inventory
    137,618       134,275  
Deferred income taxes
    9,063       6,677  
Prepaid expenses and other current assets
    5,352       8,912  
Total current assets
    244,639       244,113  
Property, plant and equipment, net
    89,365       87,697  
Goodwill
    33,001       32,999  
Intangible assets, net of accumulated amortization of $5,296 at June 27, 2009 and $5,035 at March 28, 2009
    12,682       12,673  
Other assets
    4,839       4,585  
Total assets
  $ 384,526     $ 382,067  
                 
LIABILITIES AND STOCKHOLDERS' EQUITY
               
Current liabilities:
               
Accounts payable
  $ 16,801     $ 20,525  
Accrued expenses and other current liabilities
    14,719       16,533  
Current portion of long-term debt
    1,151       1,151  
Total current liabilities
    32,671       38,209  
Long-term debt, less current portion
    67,000       67,000  
Deferred income taxes
    6,431       6,341  
Other non-current liabilities
    14,971       14,506  
Total liabilities
    121,073       126,056  
                 
Stockholders' equity:
               
Preferred stock, $.01 par value; authorized shares: 10,000,000 at June 27, 2009 and March 28, 2009; none issued and outstanding
           
Common stock, $.01 par value; authorized shares: 60,000,000 at June 27, 2009 and March 28, 2009; issued and outstanding shares: 21,838,486 shares at June 27, 2009 and March 28, 2009, respectively
    218       218  
Additional paid-in capital
    187,885       187,139  
Accumulated other comprehensive income (loss)
    (1,698 )     (3,327 )
Retained earnings
    81,209       76,142  
Treasury stock, at cost, 132,230 shares at June 27, 2009 and  March 28, 2009, respectively
    (4,161 )     (4,161 )
Total stockholders' equity
    263,453       256,011  
Total liabilities and stockholders' equity
  $ 384,526     $ 382,067  
See accompanying notes.

 
3

 

RBC Bearings Incorporated
Consolidated Statements of Operations
(dollars in thousands, except share and per share data)
(Unaudited)

   
Three Months Ended
 
   
June 27,
2009
   
June 28,
2008
 
Net sales
  $ 63,732     $ 92,380  
Cost of sales
    43,828       61,825  
Gross margin
    19,904       30,555  
Operating expenses:
               
Selling, general and administrative
    11,619       13,127  
Other, net
    506       382  
Total operating expenses
    12,125       13,509  
Operating income
    7,779       17,046  
Interest expense, net
    469       681  
Loss on early extinguishment of debt
          319  
Other non-operating income
    (325 )     (83 )
Income before income taxes
    7,635       16,129  
Provision for income taxes
    2,568       5,446  
Net income
  $ 5,067     $ 10,683  
Net income per common share:
               
Basic
  $ 0.23     $ 0.50  
Diluted
  $ 0.23     $ 0.49  
Weighted average common shares:
               
                 
Basic
    21,582,607       21,561,375  
Diluted
    21,691,059       21,782,020  

See accompanying notes.

 
4

 

RBC Bearings Incorporated
Consolidated Statements of Cash Flows
(dollars in thousands)
(Unaudited)
   
Three Months Ended
 
   
June 27,
 2009
   
June 28,
 2008
 
Cash flows from operating activities:
           
Net income
  $ 5,067     $ 10,683  
Adjustments to reconcile net income to net cash provided by operating activities:
               
Depreciation
    2,573       2,792  
Deferred income taxes
    (2,298 )     1,077  
Amortization of intangible assets
    318       374  
Amortization of deferred financing costs
    51       59  
Stock-based compensation
    746       552  
Loss on disposition of assets
    19       30  
Loss on early extinguishment of debt (non-cash portion)
          319  
Changes in operating assets and liabilities, net of acquisitions:
               
Accounts receivable
    15,160       3,139  
Inventory
    (2,349 )     (3,981 )
Prepaid expenses and other current assets
    3,588       3,666  
Other non-current assets
    (689 )     33  
Accounts payable
    (3,891 )     1,249  
Accrued expenses and other current liabilities
    (2,008 )     1,114  
Other non-current liabilities
    482       607  
Net cash provided by operating activities
    16,769       21,713  
                 
Cash flows from investing activities:
               
Purchase of property, plant and equipment
    (4,270 )     (4,569 )
Purchase of short-term investments
    (4,730 )      
Acquisition of businesses, net of cash acquired
          (6,579 )
Proceeds from sale of assets
          18  
Net cash used in investing activities
    (9,000 )     (11,130 )
                 
Cash flows from financing activities:
               
Net increase in revolving credit facility
          9,000  
Repurchase of common stock
          (345 )
Retirement of industrial revenue bonds
          (15,500 )
Principal payments on capital lease obligations
    (68 )     (48 )
Net cash used in financing activities
    (68 )     (6,893 )
                 
Effect of exchange rate changes on cash
    440       (152 )
                 
Cash and cash equivalents:
               
Increase during the period
    8,141       3,538  
Cash, at beginning of period
    30,557       9,859  
Cash, at end of period
  $ 38,698     $ 13,397  
                 
Supplemental disclosures of cash flow information:
               
Cash paid during the period for:
               
Interest
  $ 427     $ 630  
Income taxes
  $ 119     $ 1,112  

See accompanying notes.

 
5

 

RBC Bearings Incorporated
Notes to Unaudited Interim Consolidated Financial Statements
(dollars in thousands, except share and per share data)

The consolidated financial statements included herein have been prepared by RBC Bearings Incorporated, a Delaware corporation (collectively with its subsidiaries, the “Company”), without audit, pursuant to the rules and regulations of the Securities and Exchange Commission. The March 28, 2009 fiscal year end balance sheet data have been derived from the Company’s audited financial statements, but do not include all disclosures required by generally accepted accounting principles in the United States. The interim financial statements included with this report have been prepared on a consistent basis with the Company’s audited financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the fiscal year ended March 28, 2009.

The consolidated financial statements include the accounts of RBC Bearings Incorporated, Roller Bearing Company of America, Inc. (“RBCA”) and its wholly-owned subsidiaries, Industrial Tectonics Bearings Corporation (“ITB”), RBC Linear Precision Products, Inc. (“LPP”), RBC Nice Bearings, Inc. (“Nice”), RBC Precision Products - Bremen, Inc. (“Bremen (MBC)”), RBC Precision Products - Plymouth, Inc. (“Plymouth”), Tyson Bearings, Inc. (“Tyson”), Schaublin Holdings S.A. and its wholly-owned subsidiaries (“Schaublin”), RBC de Mexico S DE RL DE CV (“Mexico”), RBC Oklahoma, Inc. (“RBC Oklahoma”), RBC Aircraft Products, Inc. (“API”), Shanghai Representative office of Roller Bearing Company of America, Inc. (“RBC Shanghai”), RBC Southwest Products, Inc. (“SWP”), All Power Manufacturing Co. (“All Power”), RBC Bearings U.K. Limited and its wholly-owned subsidiary Phoenix Bearings Limited (“Phoenix”) and RBC CBS Coastal Bearing Services LLC (“CBS”), as well as its Transport Dynamics (“TDC”), Heim (“Heim”), Engineered Components (“ECD”), A.I.D. Company (“AID”), BEMD Company (“BEMD”) and PIC Design (“PIC Design”) divisions of RBCA. U.S. Bearings (“USB”) is a division of SWP and Schaublin USA is a division of Nice.  All intercompany balances and transactions have been eliminated in consolidation.

These statements reflect all adjustments, accruals and estimates consisting only of items of a normal recurring nature, which are, in the opinion of management, necessary for the fair presentation of the consolidated financial condition and consolidated results of operations for the interim periods presented.  These financial statements should be read in conjunction with the Company’s audited financial statements and notes thereto included in the Annual Report on Form 10-K.

The Company operates in four reportable business segments—roller bearings, plain bearings, ball bearings, other and corporate—in which it manufactures roller bearing components and assembled parts and designs and manufactures high-precision roller and ball bearings. The Company sells to a wide variety of original equipment manufacturers (“OEMs”) and distributors who are widely dispersed geographically.

The Company has performed a review of subsequent events through the date of filing (August 5, 2009) of this Form 10-Q.

The results of operations for the three month period ended June 27, 2009 are not necessarily indicative of the operating results for the full year. The three month periods ended June 27, 2009 and June 28, 2008 each include 13 weeks. The amounts shown are in thousands, unless otherwise indicated.

Adoption of Recent Accounting Pronouncements

In September 2006, the Financial Accounting Standards Board (“FASB”) issued Statement of Financial Accounting Standard (“SFAS”) No. 157 “Fair Value Measurements” (“SFAS No. 157”) in order to establish a single definition of fair value and a framework for measuring fair value that is intended to result in increased consistency and comparability in fair value measurements. In February 2008, the FASB issued Staff Position FAS 157-2, which delayed by one year the effective date of SFAS No. 157 for all non-financial assets and non-financial liabilities, except those that are recognized or disclosed at fair value in the financial statements on a recurring basis (at least annually). The delay pertains to items including, but not limited to, non-financial assets and non-financial liabilities initially measured at fair value in a business combination, reporting units measured at fair value in the first step of evaluating goodwill for impairment, indefinite-lived intangible assets measured at fair value for impairment assessment, and long-lived assets measured at fair value for impairment assessment.  The Company completed the adoption of SFAS No. 157 as of the beginning of its 2010 fiscal year which did not have an impact on the Company’s results of operations and financial position.

 
6

 

In December 2007, the FASB issued SFAS No. 141(R), “Business Combinations,” and SFAS No. 160, “Accounting and Reporting of Noncontrolling Interests in Consolidated Financial Statements, an amendment of ARB No. 51.”  These new standards will significantly change the financial accounting and reporting of business combination transactions and noncontrolling (or minority) interests in consolidated financial statements.

In comparison to current practice, the most significant changes to business combination accounting pursuant to SFAS No. 141(R) include requirements to:

 
·
Recognize, with certain exceptions, 100 percent of the fair values of assets acquired, liabilities assumed, and noncontrolling interests in acquisitions of less than a 100 percent controlling interest when the acquisition constitutes a change in control of the acquired entity.
 
·
Measure acquirer shares issued in consideration for a business combination at fair value on the acquisition date.
 
·
Recognize contingent consideration arrangements at their acquisition-date fair values, with subsequent changes in fair value generally reflected in earnings.
 
·
With certain exceptions, recognize preacquisition loss and gain contingencies at their acquisition-date fair values.
 
·
Capitalize in-process research and development (IPR&D) assets acquired.
 
·
Expense, as incurred, acquisition-related transaction costs.
 
·
Capitalize acquisition-related restructuring costs only if the criteria in SFAS No. 146, “Accounting for Costs Associated with Exit or Disposal Activities,” are met as of the acquisition date.
 
·
Recognize changes that result from a business combination transaction in an acquirer’s existing income tax valuation allowances and tax uncertainty accruals as adjustments to income tax expense.

SFAS No. 160 requires that a noncontrolling interest in a consolidated subsidiary be displayed in the consolidated statement of financial position as a separate component of equity because the noncontrolling interests meet the definition of equity of the consolidated entity. SFAS No. 141(R) is required to be adopted concurrently with SFAS No. 160 and is effective for business combination transactions for which the acquisition date is on or after the beginning of the first annual reporting period beginning on or after December 15, 2008, which for the Company is fiscal 2010.  Early adoption is prohibited. The adoption of SFAS No. 141(R) and SFAS No. 160 did not have an impact on the Company’s results of operations and financial position.

In December 2008, the FASB issued FASB Staff Position, or FSP, No. FAS 132(R)-1, “Employers’ Disclosures about Postretirement Benefit Plan Assets,” which requires enhanced disclosures about plan assets in an employer’s defined benefit pension or other postretirement plans.  These disclosures are intended to provide users of financial statements with a greater understanding of how investment allocation decisions are made, the major categories of plan assets, the inputs and valuation techniques used to measure the fair value of plan assets and significant concentrations of risk within plan assets.  FSP No. FAS 132(R)-1 will apply to the Company’s plan asset disclosures in its fiscal year ending April 3, 2010.  The Company is currently evaluating the disclosure implications of this pronouncement, however the adoption of it will not have an impact on the Company’s results of operations and financial position.

In April 2009, the FASB issued FSP No. FAS 107-1 and APB 28-1, “Interim Disclosures about Fair Value of Financial Instruments,” which requires disclosures about the fair value of financial instruments for interim reporting periods.  This requirement is effective beginning with the Company’s quarter ending June 27, 2009.  However, the adoption of it does not have an impact on the Company’s results of operations and financial position.

 
7

 

In May 2009, the FASB issued SFAS No. 165, “Subsequent Events.”  SFAS No. 165 establishes general standards of accounting for and disclosure of events that occur after the balance sheet date but before financial statements are issued or are available to be issued.  SFAS No. 165 is effective for the Company beginning with the quarter ending June 27, 2009.  However, it does not have an impact on the Company’s results of operations and financial position.

Pending Accounting Pronouncements

In June 2009, the FASB issued Statement of Financial Accounting Standards No. 168, “The FASB Accounting Standards Codification™ and the Hierarchy of Generally Accepted Accounting Principles a Replacement of FASB Statement No. 162” (“FAS 168”). This Standard establishes the FASB Accounting Standards Codification™ (the “Codification”) as the source of authoritative accounting principles recognized by the FASB to be applied by nongovernmental entities in the preparation of financial statements in conformity with U.S. GAAP. The Codification does not change current U.S. GAAP, but is intended to simplify user access to all authoritative U.S. GAAP by providing all the authoritative literature related to a particular topic in one place. The Codification is effective for interim and annual periods ending after September 15, 2009, and as of the effective date, all existing accounting standard documents will be superseded. The Codification is effective for the Company in the second quarter of 2009, and accordingly, its Quarterly Report on Form 10-Q for the quarter ending September 26, 2009 and all subsequent public filings will reference the Codification as the sole source of authoritative literature. The new pronouncement will not have an impact on the Company's results of operations or financial position.

1. Net Income Per Common Share

Basic net income per common share is computed by dividing net income available to common stockholders by the weighted-average number of common shares outstanding.

Diluted net income per common share is computed by dividing net income by the sum of the weighted-average number of common shares, dilutive common share equivalents then outstanding using the treasury stock method. Common share equivalents consist of the incremental common shares issuable upon the exercise of stock options.

The table below reflects the calculation of weighted-average shares outstanding for each period presented as well as the computation of basic and diluted net income per common share:

   
Three Months Ended
 
   
June 27,
2009
   
June 28,
2008
 
             
Net income
  $ 5,067     $ 10,683  
                 
Denominator for basic net income  per common share—weighted-average shares
    21,582,607       21,561,375  
Effect of dilution due to employee stock options
    108,452       220,645  
Denominator for diluted net income per common share — weighted-average shares
    21,691,059       21,782,020  
                 
Basic net income per common share
  $ 0.23     $ 0.50  
                 
Diluted net income per common share
  $ 0.23     $ 0.49  
 
Basic weighted-average common shares do not include 123,649 unvested restricted stock shares.

 
8

 

At June 27, 2009, 860,700 employee stock options have been excluded from the calculation of diluted earnings per share, as the inclusion of these shares would be anti-dilutive.  No such options were excluded at June 28, 2008.

2.  Cash and Cash Equivalents

The Company considers all highly liquid investments purchased with an original maturity of three months or less to be cash equivalents.

3. Short-term Investments

Short-term investments include corporate bonds that are classified as available-for-sale expected to be sold within the next twelve months.  These bonds, with maturity dates ranging from March 2011 to November 2012, were measured at fair value by using quoted prices in active markets for identical assets and are classified as Level 1 of the valuation hierarchy of SFAS 157.  The impact on results of operations and financial position was not significant.

4.  Inventory

Inventories are stated at the lower of cost or market, using the first-in, first-out method, and are summarized below:
   
June 27,
2009
   
March 28,
2009
 
Raw materials
  $ 11,213     $ 11,325  
Work in process
    39,974       39,155  
Finished goods
    86,431       83,795  
    $ 137,618     $ 134,275  

5.  Comprehensive Income

Total comprehensive income is as follows:
   
Three Months Ended
 
   
June 27,
2009
   
June 28,
2008
 
Net income
  $ 5,067     $ 10,683  
Net prior service cost and actuarial losses (gains), net of taxes
    16       (14 )
Change in fair value of derivatives, net of taxes
    126       504  
Foreign currency translation adjustments
    1,487       (744 )
Total comprehensive income
  $ 6,696     $ 10,429  

6.           Debt

The balances payable under all borrowing facilities are as follows:
   
June 27,
2009
   
March 28,
2009
 
KeyBank Credit Agreement, five-year senior secured revolving credit facility; amounts outstanding bear interest at LIBOR plus a specified margin (LIBOR 0.3125% and 0.5% at June 27, 2009 and March 28, 2009, respectively)
  $ 67,000     $ 67,000  
Note Payable, payable through September 2009
    1,151       1,151  
Total Debt
    68,151       68,151  
Less: Current Portion
    1,151       1,151  
Long-Term Debt
  $ 67,000     $ 67,000  

 
9

 

The current portion of long-term debt includes $401 notes payable related to the acquisitions of AID and BEMD and a $750 note payable related to the All Power acquisition as of June 27, 2009 and March 28, 2009, respectively.

On January 8, 2008, the Company entered into an interest rate swap agreement with a total notional value of $30,000 to hedge a portion of its variable rate debt. Under the terms of the agreement, the Company pays interest at a fixed rate (3.64%)  and receives interest at variable rates. The maturity date of the interest swap is June 24, 2011. The fair value of this swap at June 27, 2009 was a liability of $1,489, included in other current liabilities, and was measured using observable market inputs such as the current market price (as provided by the financial institution with which the swap has been executed), the Companys own credit risk and its counterparty’s credit risks as appropriate. Based on these inputs, the swap is classified within Level 2 of the valuation hierarchy of SFAS No. 157. This instrument is designated and qualifies as a cash flow hedge. Accordingly, the gain or loss on both the hedging instrument and the hedged item attributable to the hedged risk are recognized in other comprehensive income.

7.  Income Taxes

The Company files income tax returns in the U.S. federal jurisdiction, and various states and foreign jurisdictions.  With few exceptions, the Company is no longer subject to state or foreign income tax examinations by tax authorities for years ending before March 31, 2002.   The Company is no longer subject to U.S. federal tax examination by the Internal Revenue Service for years ending before March 31, 2004.

The Company does not expect any material changes to the unrecognized tax benefits within the next twelve months.  There have been no material changes to the total amount of unrecognized tax benefits during the three months ended June 27, 2009.

The effective income tax rates for the three month periods ended June 27, 2009 and June 28, 2008 were 33.6% and 33.8%, respectively. The effective income tax rates are below the U.S. statutory rate due to foreign income taxed at lower rates and a special manufacturing deduction in the U.S.

8.           Reportable Segments

The Company operates through operating segments for which separate financial information is available, and for which operating results are evaluated regularly by the Company's chief operating decision maker in determining resource allocation and assessing performance. Those operating segments with similar economic characteristics and that meet all other required criteria, including nature of the products and production processes, distribution patterns and classes of customers, are aggregated as reportable segments. Certain other operating segments do not exhibit the common attributes mentioned above and do not meet the quantitative thresholds for separate disclosure, and their information is combined and disclosed as "Other". There is also a segment reflecting corporate charges.

The Company has four reportable business segments engaged in the manufacture and sale of the following:
 
Roller Bearings.  Roller bearings are anti-friction bearings that use rollers instead of balls. The Company manufactures four basic types of roller bearings: heavy duty needle roller bearings with inner rings, tapered roller bearings, track rollers and aircraft roller bearings.
 
Plain Bearings.  Plain bearings are produced with either self-lubricating or metal-to-metal designs and consists of several sub-classes, including rod end bearings, spherical plain bearings and journal bearings. Unlike ball bearings, which are used in high-speed rotational applications, plain bearings are primarily used to rectify inevitable misalignments in various mechanical components.

Ball Bearings.  The Company manufactures four basic types of ball bearings: high precision aerospace, airframe control, thin section and commercial ball bearings which are used in high-speed rotational applications.

 
10

 

Other.  Other consists of four minor operating locations that do not fall into the above segmented categories. The Company produces precision ground ball bearing screws that offer repeatable positioning accuracy in machine tools, transfer lines, robotic handling and semiconductor equipment. The Company’s precision machine tool collets  provide effective part holding and accurate part location during machining operations. Additionally, the Company provides machining for integrated bearing assemblies and aircraft components for the commercial and defense aerospace markets and tight-tolerance, precision mechanical components for use in the motion control industry.

Corporate.  Corporate consists of expenses incurred at the corporate office.

Segment performance is evaluated based on segment net sales and operating income. Items not allocated to segment operating income include corporate administrative expenses and certain other amounts.

   
Three Months Ended
 
   
June 27,
2009
   
June 28,
2008
 
Net External Sales
           
Roller
  $ 15,568     $ 24,957  
Plain
    31,000       43,715  
Ball
    12,242       15,046  
Other
    4,922       8,662  
    $ 63,732     $ 92,380  
                 
Operating Income
               
Roller
  $ 4,620     $ 7,088  
Plain
    5,773       11,087  
Ball
    2,200       3,610  
Other
    52       981  
Corporate
    (4,866 )     (5,720 )
    $ 7,779     $ 17,046  
                 
Geographic External Sales
               
Domestic
  $ 54,244     $ 77,098  
Foreign
    9,488       15,282  
    $ 63,732     $ 92,380  
Intersegment Sales
               
Roller
  $ 1,963     $ 2,466  
Plain
    354       651  
Ball
    1,656       1,981  
Other
    4,102       4,683  
    $ 8,075     $ 9,781  
All intersegment sales are eliminated in consolidation.

 
11

 


ITEM 2.  Management’s Discussion and Analysis of Financial Condition and Results of Operations
 
Cautionary Statement As To Forward-Looking Information
 
The information in this discussion contains “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934 which are subject to the “safe harbor” created by those sections. All statements other than statements of historical facts, included in this quarterly report on Form 10-Q regarding our strategy, future operations, future financial position, future revenues, projected costs, prospects and plans and objectives of management are “forward-looking statements” as the term is defined in the Private Securities Litigation Reform Act of 1995.

 The words “anticipates,” “believes,” “estimates,” “expects,” “intends,” “may,” “plans,” “projects,” “will,” “would” and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words.  We may not actually achieve the plans, intentions or expectations disclosed in our forward-looking statements and you should not place undue reliance on our forward-looking statements.  Actual results or events could differ materially from the plans, intentions and expectations disclosed in the forward-looking statements that we make.  These forward-looking statements involve risks and uncertainties that could cause our actual results to differ materially from those in the forward-looking statements, including, without limitation:  (a) the bearing industry is highly competitive, and this competition could reduce our profitability or limit our ability to grow; (b) the loss of a major customer could result in a material reduction in our revenues and profitability; (c) weakness in any of the industries in which our customers operate, as well as the cyclical nature of our customers’ businesses generally, could materially reduce our revenues and profitability; (d) future reductions or changes in U.S. government spending could negatively affect our business; (e) fluctuating supply and costs of raw materials and energy resources could materially reduce our revenues, cash flow from operations and profitability; (f) our products are subject to certain approvals, and the loss of such approvals could materially reduce our revenues and profitability; (g) restrictions in our indebtedness agreements could limit our growth and our ability to respond to changing conditions; (h) work stoppages and other labor problems could materially reduce our ability to operate our business; (i) our business is capital intensive and may consume cash in excess of cash flow from our operations; (j) unexpected equipment failures, catastrophic events or capacity constraints may increase our costs and reduce our sales due to production curtailments or shutdowns; (k) we may not be able to continue to make the acquisitions necessary for us to realize our growth strategy; (l) the costs and difficulties of integrating acquired businesses could impede our future growth; (m) we depend heavily on our senior management and other key personnel, the loss of whom could materially affect our financial performance and prospects; (n) our international operations are subject to risks inherent in such activities; (o) currency translation risks may have a material impact on our results of operations; (p) we may be required to make significant future contributions to our pension plan; (q) we may incur material losses for product liability and recall related claims; (r) environmental regulations impose substantial costs and limitations on our operations, and environmental compliance may be more costly than we expect; (s) our intellectual property and other proprietary rights are valuable, and any inability to protect them could adversely affect our business and results of operations; in addition, we may be subject to infringement claims by third parties; (t) cancellation of orders in our backlog of orders could negatively impact our revenues; (u) if we fail to maintain an effective system of internal controls, we may not be able to accurately report our financial results or prevent fraud; and (v) provisions in our charter documents may prevent or hinder efforts to acquire a controlling interest in us. Additional information regarding these and other risks and uncertainties is contained in our periodic filings with the SEC, including, without limitation, the risks identified under the heading “Risk Factors” set forth in the Annual Report on Form 10-K for the year ended March 28, 2009.  Our forward-looking statements do not reflect the potential impact of any future acquisitions, mergers, dispositions, joint ventures or investments we may make. We do not intend, and undertake no obligation, to update or alter any forward-looking statement.  The following section is qualified in its entirety by the more detailed information, including our financial statements and the notes thereto, which appears elsewhere in this Quarterly Report.

 
12

 

Overview

We are an international manufacturer and marketer of highly engineered precision plain, roller and ball bearings. Bearings, which are integral to the manufacture and operation of most machines and mechanical systems, reduce wear to moving parts, facilitate proper power transmission and reduce damage and energy loss caused by friction. While we manufacture products in all major bearing categories, we focus primarily on highly technical or regulated bearing products for specialized markets that require sophisticated design, testing and manufacturing capabilities. We believe our unique expertise has enabled us to garner leading positions in many of the product markets in which we primarily compete. We have been providing bearing solutions to our customers since 1919. Over the past ten years, we have significantly broadened our end markets, products, customer base and geographic reach. We currently have 24 facilities, of which 22 are manufacturing facilities, in four countries.

Demand for bearings generally follows the market for products in which bearings are incorporated and the economy as a whole. Purchasers of bearings include industrial equipment and machinery manufacturers, producers of commercial and military aerospace equipment such as missiles and radar systems, agricultural machinery manufacturers, construction and specialized equipment manufacturers and automotive and commercial truck manufacturers. The markets for our products are cyclical, and general market conditions could negatively impact our operating results. We have endeavored to mitigate the cyclicality of our product markets by entering into sole-source relationships and long-term purchase orders, through diversification across multiple market segments within the aerospace and defense and diversified industrial segments, by increasing sales to the aftermarket and by focusing on developing highly customized solutions.

Outlook

Backlog, as of June 27, 2009, was $170.9 million versus $239.9 million as of June 28, 2008. Management believes that operating cash flows and available credit under the credit facility will provide adequate resources to fund internal and external growth initiatives for the foreseeable future.

Results of Operations

The following table sets forth the various components of our consolidated statements of operations, expressed as a percentage of net sales, for the periods indicated that are used in connection with the discussion herein.

   
Three Months Ended
 
   
June 27,
2009
   
June 28,
2008
 
Statement of Operations Data:
           
Net sales
    100.0 %     100.0 %
Gross margin
    31.2       33.1  
Selling, general and administrative
    18.2       14.2  
Other, net
    0.8       0.4  
Operating income
    12.2       18.5  
Interest expense, net
    0.7       0.7  
Loss on early extinguishment of debt
          0.3  
Other non-operating income
    (0.5 )      
Income before income taxes
    12.0       17.5  
Provision for income taxes
    4.0       5.9  
Net income
    8.0 %     11.6 %

 
13

 

Three Month Period Ended June 27, 2009 Compared to Three Month Period Ended June 28, 2008

Net Sales.  Net sales for the three month period ended June 27, 2009 were $63.7 million, a  decrease of $28.7 million, or 31.0%, compared to $92.4 million for the same period in the prior year. During the three month period ended June 27, 2009, we experienced a net sales decline in all four of our business segments, driven by  lower demand across our end markets due to the weak economic climate. Our net sales to our diversified industrial customers fell 46.3% in the first quarter of fiscal 2010 compared to the same period last fiscal year.  This is mainly the result of the overall decline in the global industrial markets.  Net sales to aerospace and defense customers decreased 18.1% in the first quarter of fiscal 2010 compared to the same period last fiscal year, mainly driven by a slowdown in the business jet market and inventory liquidations by aircraft distributors.

The Plain Bearings segment achieved net sales of $31.0 million for the three month period ended June 27, 2009, a decrease of $12.7 million, or 29.1%, compared to $43.7  million for the same period in the prior fiscal year. The weak economy contributed to an overall net sales decline in this segment, with a $5.5 million decrease in net sales to diversified industrial customers combined with a $7.2 million decline in net sales to aerospace and defense customers.

The Roller Bearings segment achieved net sales of $15.6 million for the three month period ended June 27, 2009, a decrease of $9.4 million, or 37.6%, compared to $25.0 million for the same period in the prior fiscal year. The weak economic performance of the industrial sector contributed $7.9 million of this net sales decline combined with a $1.5 million decrease in net sales to aerospace and defense customers.

The Ball Bearings segment achieved net sales of $12.2 million for the three month period ended June 27, 2009, a decrease of $2.8 million, or 18.6%, compared to $15.0 million for the same period in the prior year.  All of this decline was attributable to the impact of the economic downturn on the industrial sector, with net sales to the aerospace and defense sector remaining flat compared to the same period in fiscal 2009.

The Other segment, which is focused mainly on the sale of machine tool collets and precision mechanical components, achieved net sales of $4.9 million for the three month period ended June 27, 2009, a decrease of $3.8 million, or 43.2%, compared to $8.7 million for the same period last year. Of this decrease, $3.2 million was attributable to lower sales of tool collets in Europe for the machine tool industry and $0.6 due to the general industrial decline for mechanical components.

Gross Margin.  Gross margin was $19.9 million, or 31.2% of net sales, for the three month period ended June 27, 2009, versus $30.6 million, or 33.1% of net sales, for the comparable period in fiscal 2009. The decrease in our gross margin as a percentage of net sales was primarily the result of the current economic downturn combined with start-up costs for our large bearing product lines.

Selling, General and Administrative.  SG&A expenses decreased by $1.5 million, or 11.5%, to $11.6 million for the three month period ended June 27, 2009 compared to $13.1 million for the same period in fiscal 2009. As a percentage of net sales, SG&A increased to 18.2% for the three month period ended June 27, 2009 compared to 14.2% for the three month period ended June 28, 2008. The decrease of $1.5 million was primarily attributable to personnel-related cost reductions of $1.5 million and lower outside service fees of $0.2 million offset by $0.2 million of incremental stock compensation expense.

Other, net.  Other, net for the three month period ended June 27, 2009 was $0.5 million, an increase of $0.1 million, compared to the same period last fiscal year.  For the three month period ended June 27, 2009, other, net consisted of $0.3 million of amortization of intangibles and $0.2 million of restructuring costs, mainly severance costs.  For the three month period ended June 28, 2008, other, net consisted of $0.4 million of amortization of intangibles and $0.1 million of facility moving costs offset by other miscellaneous income of $0.1 million.

 
14

 

Operating Income. The decrease in operating income in all four of our business segments was driven primarily by a decrease in volume due to the current economic climate. Our operating income as a percentage of net sales declined in three of our four business segments as a result of the current economic downturn and start-up costs for our large bearing product lines.  Operating income was $7.8 million, or 12.2% of net sales, for the three month period ended June 27, 2009 compared to $17.0 million, or 18.5% of net sales, for the three month period ended June 28, 2008. Operating income for the Plain Bearings segment was $5.8 million for the three month period ended June 27, 2009, or 18.6% of net sales, compared to $11.1 million for the same period last year, or 25.4% of net sales. Our Roller Bearings segment achieved an operating income for the three month period ended June 27, 2009 of $4.6 million, or 29.7% of net sales, compared to $7.1 million, or 28.4% of net sales, for the three month period ended June 28, 2008.  Our Ball Bearings segment achieved an operating income of $2.2 million, or 18.0% of net sales, for the three month period ended June 27, 2009, compared to $3.6 million, or 24.0% of net sales, for the same period in fiscal 2009. Our Other segment achieved an operating income of $0.1 million, or 1.1% of net sales, for the three month period ended June 27, 2009, compared to $1.0 million, or 11.3% of net sales, for the same period in fiscal 2009.

Interest Expense, net.  Interest expense, net decreased by $0.2 million, or 31.1%, to $0.5 million in the three month period ended June 27, 2009, compared to $0.7 million in the same period last fiscal year, mainly driven by lower interest rates.

Loss on Early Extinguishment of Debt.  For the three month period ended June 28, 2008, loss on extinguishment of debt was $0.3 million for the non-cash write-off of deferred financing fees associated with the paydown of $15.5 million of industrial revenue bonds.

Income Before Income Taxes.  Income before taxes decreased by $8.5 million, to $7.6 million for the three month period ended June 27, 2009 compared to $16.1 million for the three month period ended June 28, 2008.

Income Taxes.  Income tax expense for the three month period ended June 27, 2009 was $2.6 million compared to $5.4 million for the three month period ended June 28, 2008. Our effective income tax rate for the three month period ended June 27, 2009 was 33.6% compared to 33.8% for the three month period ended June 28, 2008.  The effective income tax rates are below the U.S. statutory rate due to foreign income taxed at lower rates and a special manufacturing deduction in the U.S.

Net Income.  Net income decreased by $5.6 million to $5.1 million for the three month period ended June 27, 2009 compared to $10.7 million for the three month period ended June 28, 2008.

Liquidity and Capital Resources

Liquidity

Our credit agreement (the “KeyBank Credit Agreement”) provides the Company with a $150.0 million five-year senior secured revolving credit facility which can be increased by up to $75.0 million, in increments of $25.0 million, under certain circumstances and subject to certain conditions (including the receipt from one or more lenders of the additional commitment).

Amounts outstanding under the KeyBank Credit Agreement generally bear interest at the prime rate, or LIBOR plus a specified margin, depending on the type of borrowing being made. The applicable margin is based on our consolidated ratio of net debt to adjusted EBITDA from time to time. Currently, our margin is 0.0% for prime rate loans and 0.625% for LIBOR rate loans. Amounts outstanding under the KeyBank Credit Agreement are due and payable on its expiration date (June 24, 2011). We may elect to prepay some or all of the outstanding balance from time to time without penalty.

 
15

 

The KeyBank Credit Agreement allows us to, among other things, make distributions to shareholders, repurchase our stock, incur other debt or liens, or acquire or dispose of assets provided that we comply with certain requirements and limitations of the credit agreement. Our obligations under the KeyBank Credit Agreement are secured by a pledge of substantially all of our and RBCA’s assets and a guaranty by us of RBCA’s obligations.  Capital expenditures (excluding acquisitions) in any fiscal year, previously limited to an amount not to exceed $20.0 million was amended to increase the limit to an amount not to exceed $30.0 million.  As of June 27, 2009, $67.0 million was outstanding under the KeyBank Credit Agreement.  Approximately $6.6 million of the KeyBank Credit Agreement is being utilized to provide letters of credit to secure our obligations relating to certain insurance programs. As of June 27, 2009, we had the ability to borrow up to an additional $76.4 million under the KeyBank Credit Agreement.

On October 27, 2008, Schaublin entered into a new bank credit facility with Credit Suisse (the “Swiss Credit Facility”) which replaced the prior bank credit facility of December 8, 2003 and its amendment of November 8, 2004.  This facility provides for up to 4.0 million Swiss francs, or $3.7 million, of revolving credit loans and letters of credit.  Borrowings under the Swiss Credit Facility bear interest at Credit Suisse’s prevailing prime bank rate.  As of June 27, 2009, there were no borrowings under the Swiss Credit Facility.

On June 15, 2007, our board of directors authorized us to repurchase up to $10.0 million of our common stock from time to time on the open market, through block trades, or in privately negotiated transactions depending on market conditions, alternative uses of capital and other factors.  Purchases may be commenced, suspended or discontinued at any time without prior notice. As of June 27, 2009, 94,874 shares have been repurchased under this plan for an aggregate cost of $3.1 million.

On May 1, 2008, the Company voluntarily paid off the Series 1999 Industrial Revenue Bond (“IRB”), the prinicipal amount of which was $4.8 million. In addition, on June 2, 2008, the Company voluntarily paid off the Series 1994 A and B IRBs, the principal amounts of which were $7.7 million and $3.0 million, respectively. The Company recorded a non-cash pre-tax charge of approximately $0.3 million in the three month period ended June 28, 2008 to write off deferred financing costs associated with the voluntary payoff of the IRBs.

Our ability to meet future working capital, capital expenditures and debt service requirements will depend on our future financial performance, which will be affected by a range of economic, competitive and business factors, particularly interest rates, cyclical changes in our end markets and prices for steel and our ability to pass through price increases on a timely basis, many of which are outside of our control.  In addition, future acquisitions could have a significant impact on our liquidity position and our need for additional funds.

From time to time we evaluate our existing facilities and operations and their strategic importance to us. If we determine that a given facility or operation does not have future strategic importance, we may sell, partially or completely, relocate production lines, consolidate or otherwise dispose of those operations. Although we believe our operations would not be materially impaired by such dispositions, relocations or consolidations, we could incur significant cash or non-cash charges in connection with them.

Cash Flows

Three Month Period Ended June 27, 2009 Compared to the Three Month Period Ended June 28, 2008

In the three month period ended June 27, 2009, we generated cash of $16.8 million from operating activities compared to $21.7 million for the three month period ended June 28, 2008. The decrease of $4.9 million was mainly a result of a decrease in net income of $5.6 million, a positive change in operating assets and liabilities of $4.5 million and a decrease in non-cash charges of $3.8 million.

Cash used for investing activities for the three month period ended June 27, 2009 included $4.3 million related to capital expenditures compared to $4.6 million for the three month period ended June 28, 2008. Of this amount, $2.8 million was associated with the building of a new wind bearing facility in Texas.  Cash used for investing activities also included $4.7 million for the purchase of short-term investments.

Financing activities used $0.1 million in the three month period ended June 27, 2009 compared to $6.9 million for the three month period ended June 28, 2008.

 
16

 

Capital Expenditures

Our capital expenditures were $4.3 million for the three month period ended June 27, 2009. Of this amount, $2.8 million was associated with the building of a new wind bearing facility in Texas. We expect to make capital expenditures of approximately $8.0 to $10.0 million during fiscal 2010 in connection with our existing business and the expansion into the large bearing market segment. We intend to fund our fiscal 2010 capital expenditures principally through existing cash, internally generated funds and borrowings under our KeyBank Credit Agreement. We may also make substantial additional capital expenditures in connection with acquisitions.

Obligations and Commitments
 
As of June 27, 2009, there was no material change in debt and interest, capital lease, operating lease or pension and postretirement obligations as compared to such obligations and liabilities as of March 28, 2009.

ITEM 3.  Quantitative and Qualitative Disclosures About Market Risk
 
Quantitative and Qualitative Disclosure About Market Risk

We are exposed to market risks, which arise during the normal course of business from changes in interest rates and foreign currency exchange rates.

Interest Rates.  We are exposed to market risk from changes in the interest rates on a significant portion of our outstanding indebtedness. Outstanding balances under our KeyBank Credit Agreement generally bear interest at the prime rate or LIBOR (the London inter-bank offered rate for deposits in U.S. dollars for the applicable LIBOR period) plus a specified margin, depending on the type of borrowing being made. The applicable margin is based on our consolidated ratio of net debt to adjusted EBITDA from time to time. As of June 27, 2009, our margin is 0.0% for prime rate loans (prime rate at June 27, 2009 was 3.25%) and 0.625% for LIBOR rate loans (one month LIBOR rate at June 27, 2009 was 0.3125%).

Our interest rate risk management objective is to limit the impact of interest rate changes on our net income and cash flow. To achieve our objective, we regularly evaluate the amount of our variable rate debt as a percentage of our aggregate debt. As of June 27, 2009, our average outstanding variable rate debt, after taking into account the average outstanding notional amount of our interest rate swap agreement, was 54% of our average outstanding debt. We manage a significant portion of our exposure to interest rate fluctuations in our variable rate debt through an interest rate swap agreement. This agreement effectively converts interest rate exposure from variable rates to fixed rates of interest.

Based on the aggregate amount of our variable rate indebtedness of $37.0 million, a 100 basis point change in interest rates would have changed our interest expense by approximately $0.4 million per year, after taking into account the $30.0 million notional amount of our interest rate swap agreement at June 27, 2009.

Foreign Currency Exchange Rates.  As a result of increased sales in Europe, our exposure to risk associated with fluctuating currency exchange rates between the U.S. dollar, the Euro, the Swiss Franc and the British Pound Sterling has increased. Our Swiss operations utilize the Swiss Franc as the functional currency, our French operations utilize the Euro as the functional currency and our English operations utilize the British Pound Sterling as the functional currency. Foreign currency transaction gains and losses are included in earnings. Approximately 15% of our net sales were denominated in foreign currencies in the the first quarter of fiscal 2010 compared to 17% in the comparable period last fiscal year. We expect that this proportion is likely to increase as we seek to increase our penetration of foreign markets, particularly within the aerospace and defense markets. Foreign currency transaction exposure arises primarily from the transfer of foreign currency from one subsidiary to another within the group, and to foreign currency denominated trade receivables. Unrealized currency translation gains and losses are recognized upon translation of the foreign subsidiaries’ balance sheets to U.S. dollars. Because our financial statements are denominated in U.S. dollars, changes in currency exchange rates between the U.S. dollar and other currencies have had, and will continue to have, an impact on our earnings. We currently do not have exchange rate hedges in place to reduce the risk of an adverse currency exchange movement. Although currency fluctuations have not had a material impact on our financial performance in the past, such fluctuations may materially affect our financial performance in the future. The impact of future exchange rate fluctuations on our results of operations cannot be accurately predicted.

 
17

 

Off-Balance Sheet Arrangements

We have no off-balance sheet arrangements.

ITEM 4.   Controls and Procedures
 
Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”)) as of June 27, 2009. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that, as of June 27, 2009, our disclosure controls and procedures were (1) designed to ensure that information relating to our Company required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported to our Chief Executive Officer and Chief Financial Officer within the time periods specified in the rules and forms of the U.S. Securities and Exchange Commission, and (2) effective, in that they provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.

Changes in Internal Control over Financial Reporting
 
No change in our internal control over financial reporting occurred during the three month period ended June 27, 2009 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act).

 
18

 

PART II - OTHER INFORMATION

ITEM 1.  Legal Proceedings
 
From time to time, we are involved in litigation and administrative proceedings which arise in the ordinary course of our business. We do not believe that any litigation or proceeding in which we are currently involved, either individually or in the aggregate, is likely to have a material adverse effect on our business, financial condition, operating results, cash flow or prospects.

ITEM 1A.  Risk Factors
 
There have been no material changes to our risk factors and uncertainties during the three month period ended June 27, 2009. For a discussion of the Risk Factors, refer to Part I, Item 1A, “Risk Factors,” contained in the Company’s Annual Report on Form 10-K for the period ended March 28, 2009.

ITEM 2.  Unregistered Sales of Equity Securities and Use of Proceeds
 
Unregistered Sales of Equity Securities

None.

Use of Proceeds

Not applicable.

Issuer Purchases of Equity Securities

On June 15, 2007, our board of directors authorized us to repurchase up to $10.0 million of our common stock from time to time on the open market, through block trades, or in privately negotiated transactions depending on market conditions, alternative uses of capital and other factors.  Purchases may be commenced, suspended or discontinued at any time without prior notice. The new program, which does not have an expiration date, replaced a $7.5 million program that expired on March 31, 2007.

Total share repurchases for the three months ended June 27, 2009 are as follows:

Period
 
Total
number
of shares
Purchased
   
Average
price paid
per share
   
Number of
shares
purchased 
as part of the
publicly
announced
program
   
Approximate
dollar value
of shares still
available to be
purchased
under the
program
(000’s)
 
03/29/2009–04/25/2009
                    $ 6,889  
04/26/2009–05/23/2009
                      6,889  
05/24/2009–06/27/2009
                    $ 6,889  
Total
                         

 
19

 

ITEM 3.  Defaults Upon Senior Securities
 
Not applicable.
 
ITEM 4.  Submission of Matters to a Vote of Security Holders
 
Not applicable.
 
ITEM 5.  Other Information
 
Not applicable.
 
ITEM 6.  Exhibits

Exhibit
Number
 
Exhibit Description
31.01
 
Certification of Chief Executive Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
31.02
 
Certification of Chief Financial Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
32.01
 
Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*
32.02
 
Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*


*           This certification accompanies this Quarterly Report on Form 10-Q, is not deemed filed with the SEC and is not to be incorporated by reference into any filing of the Company under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended (whether made before or after the date of this Quarterly Report on Form 10-Q), irrespective of any general incorporation language contained in such filing.

 
20

 


SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

RBC Bearings Incorporated
 
(Registrant)
 
       
By:
/s/ Michael J. Hartnett  
 
 
Name:
Michael J. Hartnett
 
 
Title:
Chief Executive Officer
 
 
Date:
August  5, 2009
 
       
By:
/s/ Daniel A. Bergeron   
 
 
Name:
Daniel A. Bergeron
 
 
Title:
Chief Financial Officer
 
 
Date:
August  5, 2009
 

 
21

 

EXHIBIT INDEX

Exhibit
Number
 
Exhibit Description
31.01
 
Certification of Chief Executive Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
31.02
 
Certification of Chief Financial Officer Pursuant to Securities Exchange Act Rule 13a-14(a).
32.01
 
Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*
32.02
 
Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*

*           This certification accompanies this Quarterly Report on Form 10-Q, is not deemed filed with the SEC and is not to be incorporated by reference into any filing of the Company under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended (whether made before or after the date of this Quarterly Report on Form 10-Q), irrespective of any general incorporation language contained in such filing.

 
22

 
 
Exhibit 31.01
 
CERTIFICATION OF CHIEF EXECUTIVE OFFICER
PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002
 
I, Michael J. Hartnett, certify that:
 
1. I have reviewed this quarterly report on Form 10-Q of RBC Bearings Incorporated;
 
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
 
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
 
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as
defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
 
a) designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including any consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
 
b) designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles; and

c) evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
 
d) disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
 
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
 
a) all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
 
b) any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
 
Date: August 5, 2009
By:
/s/ Michael J. Hartnett
 
   
Michael J. Hartnett
   
President and Chief Executive Officer
 
 
 

 

Exhibit 31.02
 
CERTIFICATION OF CHIEF FINANCIAL OFFICER
PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002
 
I, Daniel A. Bergeron, certify that:
 
1. I have reviewed this quarterly report on Form 10-Q of RBC Bearings Incorporated;
 
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
 
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
 
4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as
defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:
 
a) designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including any consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
 
b) designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles; and

c) evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and
 
d) disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and
 
5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):
 
a) all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and
 
b) any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.
 
Date: August 5, 2009
By:
/s/ Daniel A. Bergeron
 
   
Daniel A. Bergeron
   
Chief Financial Officer

 

 

Exhibit 32.01
 
CERTIFICATION OF CHIEF EXECUTIVE OFFICER
PURSUANT TO
18 U.S.C SECTION 1350
 
The undersigned, Michael J. Hartnett, the President and Chief Executive Officer of RBC Bearings Incorporated (the “Company”), pursuant to 18 U.S.C. §1350, hereby certifies that:
 
(i) the Quarterly Report on Form 10-Q for the period ended June 27, 2009 of the Company (the “Report”) fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
 
(ii) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.
 
Dated:  August 5, 2009
 
/s/ Michael J. Hartnett
 
Michael J. Hartnett
President and Chief Executive Officer

 

 
Exhibit 32.02
 
CERTIFICATION OF CHIEF FINANCIAL OFFICER
PURSUANT TO
18 U.S.C. SECTION 1350
 
The undersigned, Daniel A. Bergeron, Chief Financial Officer, of RBC Bearings Incorporated (the “Company”), pursuant to 18 U.S.C. §1350, hereby certifies:
 
(i) the Quarterly Report on Form 10-Q for the period ended June 27, 2009 of the Company (the “Report”) fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
 
(ii) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.
 
Dated:  August 5, 2009
 
/s/ Daniel A. Bergeron
 
Daniel A. Bergeron
Chief Financial Officer