UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

FORM 10-Q

x                              QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended June 30, 2007

OR

o                                 TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from               to               .

Commission File Number: 333-124824

RBC Bearings Incorporated

(Exact name of registrant as specified in its charter)

Delaware

 

95-4372080

(State or other jurisdiction of
incorporation or organization)

 

(I.R.S. Employer
Identification No.)

One Tribology Center

 

 

Oxford, CT 06478

 

06478

(Address of principal executive offices)

 

(Zip Code)

 

(203) 267-7001

(Registrant’s telephone number, including area code)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.   Yes x No o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check One):

Large Accelerated filer o

Accelerated filer x

Non-accelerated filer o

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).   Yes o No x

As of July 30, 2007, RBC Bearings Incorporated had 21,534,886 shares of Common Stock outstanding.

 




TABLE OF CONTENTS

Part I—FINANCIAL INFORMATION

 

3

 

ITEM 1.

Unaudited Consolidated Financial Statements

 

3

 

ITEM 2.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

14

 

ITEM 3.

Quantitative and Qualitative Disclosures About Market Risk

 

18

 

ITEM 4.

Controls and Procedures

 

19

 

 

Changes in Internal Control over Financial Reporting

 

19

 

 

Limitation of Effectiveness of Controls

 

20

 

Part II—OTHER INFORMATION

 

21

 

ITEM 1.

Legal Proceedings

 

21

 

ITEM 2.

Unregistered Sales of Equity Securities and Use of Proceeds

 

21

 

ITEM 3.

Defaults Upon Senior Securities

 

21

 

ITEM 4.

Submission of Matters to a Vote of Security Holders

 

21

 

ITEM 5.

Other Information

 

21

 

ITEM 6.

Exhibits

 

21

 

 

2




PART I—FINANCIAL INFORMATION

ITEM 1.                Financial Statements

RBC Bearings Incorporated
Consolidated Balance Sheets
(dollars in thousands, except share and per share data)

 

 

June 30,
2007

 

March 31,
2007

 

 

 

(Unaudited)

 

 

 

ASSETS

 

 

 

 

 

 

 

Current assets:

 

 

 

 

 

 

 

Cash

 

 

$

4,615

 

 

$

5,184

 

Accounts receivable, net of allowance for doubtful accounts of $870 at June 30, 2007 and $867 at March 31, 2007

 

 

59,017

 

 

54,636

 

Inventory

 

 

108,242

 

 

103,022

 

Deferred income taxes

 

 

6,645

 

 

7,115

 

Prepaid expenses and other current assets

 

 

4,040

 

 

2,914

 

Total current assets

 

 

182,559

 

 

172,871

 

Property, plant and equipment, net

 

 

66,530

 

 

61,209

 

Goodwill

 

 

29,631

 

 

29,631

 

Intangible assets, net of accumulated amortization of $2,570 at June 30, 2007 and $2,329 at March 31, 2007

 

 

7,968

 

 

5,793

 

Deferred financing costs, net of accumulated amortization of $460 at June 30, 2007 and $409 at March 31, 2007

 

 

1,116

 

 

1,207

 

Other assets

 

 

3,045

 

 

3,002

 

Total assets

 

 

$

290,849

 

 

$

273,713

 

LIABILITIES AND STOCKHOLDERS’ EQUITY

 

 

 

 

 

 

 

Current liabilities:

 

 

 

 

 

 

 

Accounts payable

 

 

$

26,237

 

 

$

21,299

 

Accrued expenses and other current liabilities

 

 

10,564

 

 

11,683

 

Current portion of long-term debt

 

 

750

 

 

750

 

Capital lease obligations

 

 

155

 

 

169

 

Total current liabilities

 

 

37,706

 

 

33,901

 

Long-term debt, less current portion

 

 

54,655

 

 

58,655

 

Capital lease obligations, less current portion

 

 

491

 

 

456

 

Deferred income taxes

 

 

7,826

 

 

6,479

 

Other non-current liabilities

 

 

8,613

 

 

6,051

 

Total liabilities

 

 

109,291

 

 

105,542

 

Stockholders’ equity:

 

 

 

 

 

 

 

Preferred stock, $.01 par value; authorized shares: 10,000,000 at June 30, 2007 and March 31, 2007; none issued and outstanding

 

 

 

 

 

Common stock, $.01 par value; authorized shares: 60,000,000 at June 30, 2007 and March 31, 2007; issued and outstanding shares: 21,518,460 at June 30, 2007 and 21,408,994 at March 31, 2007

 

 

215

 

 

214

 

Additional paid-in capital

 

 

173,357

 

 

169,489

 

Accumulated other comprehensive loss

 

 

(2,283

)

 

(2,206

)

Retained earnings

 

 

11,319

 

 

1,724

 

Treasury stock, at cost, 37,356 shares at June 30, 2007 and March 31, 2007

 

 

(1,050

)

 

(1,050

)

Total stockholders’ equity

 

 

181,558

 

 

168,171

 

Total liabilities and stockholders’ equity

 

 

$

290,849

 

 

$

273,713

 

 

See accompanying notes.

3




RBC Bearings Incorporated
Consolidated Statements of Operations
(dollars in thousands, except share and per share data)
(Unaudited)

 

 

Three Months Ended

 

 

 

June 30,
2007

 

July 1,
2006

 

Net sales

 

$

79,823

 

$

75,231

 

Cost of sales

 

52,378

 

51,722

 

Gross margin

 

27,445

 

23,509

 

Operating expenses:

 

 

 

 

 

Selling, general and administrative

 

11,302

 

9,627

 

Other, net

 

362

 

384

 

Total operating expenses

 

11,664

 

10,011

 

Operating income

 

15,781

 

13,498

 

Interest expense, net

 

866

 

2,162

 

Loss on early extinguishment of debt

 

 

3,576

 

Income before income taxes

 

14,915

 

7,760

 

Provision for income taxes

 

5,090

 

2,736

 

Net income

 

$

9,825

 

$

5,024

 

Net income per common share:

 

 

 

 

 

Basic

 

$

0.46

 

$

0.25

 

Diluted

 

$

0.45

 

$

0.24

 

Weighted average common shares:

 

 

 

 

 

Basic

 

21,377,482

 

20,088,482

 

Diluted

 

21,882,470

 

20,913,218

 

 

See accompanying notes.

4




RBC Bearings Incorporated
Consolidated Statements of Cash Flows
(dollars in thousands)
(Unaudited)

 

 

Three Months Ended

 

 

 

June 30,
2007

 

July 1,
2006

 

Cash flows from operating activities:

 

 

 

 

 

Net income

 

$

9,825

 

$

5,024

 

Adjustments to reconcile net income to net cash provided by operating activities:

 

 

 

 

 

Depreciation

 

2,172

 

2,252

 

Deferred income taxes

 

1,786

 

2,459

 

Amortization of intangible assets

 

241

 

151

 

Amortization of deferred financing costs and debt discount

 

51

 

175

 

Stock-based compensation

 

350

 

 

Loss on disposition of assets

 

10

 

32

 

Loss on early extinguishment of debt (non-cash portion)

 

 

3,576

 

Other

 

 

9

 

Changes in operating assets and liabilities, net of acquisitions:

 

 

 

 

 

Accounts receivable

 

(3,091

)

(2,277

)

Inventory

 

(3,798

)

2,515

 

Prepaid expenses and other current assets

 

(1,122

)

172

 

Other non-current assets

 

(2

)

(38

)

Accounts payable

 

4,362

 

(1,253

)

Accrued expenses and other current liabilities

 

246

 

(162

)

Other non-current liabilities

 

2,400

 

274

 

Net cash provided by operating activities

 

13,430

 

12,909

 

Cash flows from investing activities:

 

 

 

 

 

Purchase of property, plant and equipment

 

(6,623

)

(2,611

)

Acquisition of businesses, net of cash acquired

 

(4,360

)

 

Proceeds from sale of assets

 

4

 

9

 

Net cash used in investing activities

 

(10,979

)

(2,602

)

Cash flows from financing activities:

 

 

 

 

 

Net increase (decrease) in revolving credit facility

 

(4,000

)

70,000

 

Net proceeds from issuance of common stock

 

 

57,824

 

Exercise of stock options and warrants

 

1,043

 

855

 

Payments on term loans

 

 

(145,250

)

Principal payments on capital lease obligations

 

(51

)

(73

)

Financing fees paid in connection with senior credit facility

 

 

(833

)

Net cash used in financing activities

 

(3,008

)

(17,477

)

Effect of exchange rate changes on cash

 

(12

)

101

 

Cash and cash equivalents:

 

 

 

 

 

Decrease during the period

 

(569

)

(7,069

)

Cash, at beginning of period

 

5,184

 

16,126

 

Cash, at end of period

 

$

4,615

 

$

9,057

 

Supplemental disclosures of cash flow information:

 

 

 

 

 

Cash paid during the period for:

 

 

 

 

 

Interest

 

$

935

 

$

2,909

 

Income taxes

 

$

510

 

$

160

 

 

See accompanying notes.

5




RBC Bearings Incorporated
Notes to Unaudited Interim Consolidated Financial Statements
(dollars in thousands, except share and per share data)

The consolidated financial statements included herein have been prepared by RBC Bearings Incorporated, a Delaware corporation (collectively with its subsidiaries, the “Company”), without audit, pursuant to the rules and regulations of the Securities and Exchange Commission. The March 31, 2007 fiscal year end balance sheet data have been derived from the Company’s audited financial statements, but do not include all disclosures required by generally accepted accounting principles in the United States. The interim financial statements included with this report have been prepared on a consistent basis with the Company’s audited financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the fiscal year ended March 31, 2007.

The consolidated financial statements include the accounts of RBC Bearings Incorporated, Roller Bearing Company of America, Inc. (“RBCA”) and its wholly-owned subsidiaries, Industrial Tectonics Bearings Corporation (“ITB”), RBC Linear Precision Products, Inc. (“LPP”), RBC Nice Bearings, Inc. (“Nice”), RBC Precision Products—Bremen, Inc. (“Bremen (MBC)”), RBC Precision Products—Plymouth, Inc. (“Plymouth”), Tyson Bearings, Inc. (“Tyson”), Schaublin Holdings S.A. and its wholly-owned subsidiaries (“Schaublin”), RBC de Mexico S DE RL DE CV (“Mexico”), RBC Oklahoma, Inc. (“RBC Oklahoma”), RBC Aircraft Products, Inc. (“API”), Shanghai Representative office of Roller Bearing Company of America, Inc. (“RBC Shanghai”), RBC Southwest Products, Inc. (“SWP”) and All Power Manufacturing Co. (“All Power”), RBC Bearings U.K. Limited and its wholly-owned subsidiary Phoenix Bearings Limited (“Phoenix”), as well as its Transport Dynamics (“TDC”), Heim (“Heim”) and Engineered Components (“ECD”) divisions. U.S. Bearings (“USB”) is a division of SWP and Schaublin USA is a division of Nice. All material intercompany balances and transactions have been eliminated in consolidation.

These statements reflect all adjustments, accruals and estimates consisting only of items of a normal recurring nature, which are, in the opinion of management, necessary for the fair presentation of the consolidated financial condition and consolidated results of operations for the interim periods presented. These financial statements should be read in conjunction with the Company’s audited financial statements and notes thereto included in the Annual Report on Form 10-K.

The Company operates in four reportable business segments—roller bearings, plain bearings, ball bearings, other and corporate—in which it manufactures roller bearing components and assembled parts and designs and manufactures high-precision roller and ball bearings. The Company sells to a wide variety of original equipment manufacturers (“OEMs”) and distributors who are widely dispersed geographically.

The results of operations for the three month period ended June 30, 2007 are not necessarily indicative of the operating results for the full year. The three month periods ended June 30, 2007 and July 1, 2006 each include 13 weeks. The amounts shown are in thousands, unless otherwise indicated.

Recent Accounting Pronouncements

The Company adopted Financial Accounting Standards Board (FASB”) Interpretation No. 48, “Accounting for Uncertainty in Income Taxes—an Interpretation of SFAS No. 109,” (FIN 48”), as of the beginning of its 2008 fiscal year. This Interpretation clarifies the accounting for uncertainty in income taxes. FIN 48 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken on a tax return. Under FIN 48, the Company first assesses whether it is more likely than not that an individual tax position will be

6




sustained upon examination based on its technical merits. If the tax position is more likely than not to be sustained, under the presumption the taxing authority has all relevant information, it is recognized. The recognized tax position is measured as the largest benefit that is greater than 50% likely of being realized upon ultimate settlement. Previously recognized tax positions that no longer meet the more likely than not recognition threshold are derecognized in the period in which that threshold is no longer met. Accordingly, the unit of account under this interpretation is the individual tax position and not a higher level such as the aggregate of the various positions that are encompassed by the total tax return filing. As a result of the implementation of FIN 48, the Company recognized a $230 increase in its income tax liabilities, and a reduction to the April 1, 2007 beginning balance of retained earnings of $230 (see Note 7).

1.                 Acquisition

On May 22, 2007, the Company acquired the capital stock of Phoenix for approximately $4,360 in cash. As a result of the acquisition, the Company recorded amortizable intangible assets of approximately $2,379, fixed assets of approximately $852, other long-term liabilities of approximately $82, and approximately $1,211 of working capital. No goodwill resulted.

Phoenix, located in Gloucestershire, England, manufactures bearings for the steel and mining industries as well as other general industrial applications with bore sizes ranging from 100 millimeters to one meter. Phoenix is included in the Roller Bearings segment. Proforma results inclusive of Phoenix are not materially different.

2.                 Secondary Offering

On April 18, 2006, pursuant to a purchase agreement with Merrill Lynch & Co., Merrill Lynch, Pierce, Fenner & Smith Incorporated, KeyBanc Capital Markets and Robert W. Baird & Co., the Company, along with certain of its stockholders, sold 8,989,550 shares of its common stock (5,995,529 sold by certain of the Company’s stockholders). The offering yielded the Company aggregate net proceeds of $57,824 after payment of the underwriting discount, commissions and offering expenses. The full amount of the net proceeds was used to prepay outstanding balances under the previous credit agreement.

3.                 Net Income Per Common Share

Basic net income per common share is computed by dividing net income available to common stockholders by the weighted-average number of common shares outstanding.

Diluted net income per common share is computed by dividing net income by the sum of the weighted-average number of common shares, dilutive common share equivalents then outstanding using the treasury stock method. Common share equivalents consist of the incremental common shares issuable upon the exercise of stock options and warrants.

7




The table below reflects the calculation of weighted-average shares outstanding for each period presented as well as the computation of basic and diluted net income per common share:

 

 

Three Months Ended

 

 

 

June 30,
2007

 

July 1,
2006

 

Net income

 

$         9,825

 

$         5,024

 

Denominator for basic net income per common share—weighted-average shares

 

21,377,482

 

20,088,482

 

Effect of dilution due to employee stock options and warrants

 

504,988

 

824,736

 

Denominator for diluted net income per common share—weighted-average shares

 

21,882,470

 

20,913,218

 

Basic net income per common share

 

$           0.46

 

$           0.25

 

Diluted net income per common share

 

$           0.45

 

$           0.24

 

 

4.                 Inventory

Inventories are stated at the lower of cost or market, using the first-in, first-out method, and are summarized below:

 

 

June 30,
2007

 

March 31,
2007

 

Raw materials

 

$   9,734

 

$   8,133

 

Work in process

 

33,582

 

32,457

 

Finished goods

 

64,926

 

62,432

 

 

 

$ 108,242

 

$ 103,022

 

 

5.                 Comprehensive Income

Total comprehensive income is as follows:

 

 

Three Months Ended

 

 

 

June 30,
2007

 

July 1,
2006

 

Net income

 

 

$ 9,825

 

 

$ 5,024

 

Foreign currency translation adjustments

 

 

(77

)

 

592

 

Total comprehensive income

 

 

$ 9,748

 

 

$ 5,616

 

 

6.                 Debt

On June 26, 2006, RBCA terminated the previous credit agreement and the related credit, security and ancillary agreements, and entered into a credit agreement (the “KeyBank Credit Agreement”) and related security and guaranty agreements with certain banks, KeyBank National Association, as Administrative Agent, and J.P. Morgan Chase Bank, N.A. as Co-Lead Arrangers and Joint Lead Book Runners. The KeyBank Credit Agreement provides RBCA, as borrower, with a $150,000 five-year senior secured revolving credit facility which can be increased by up to $75,000, in increments of $25,000, under certain circumstances and subject to certain conditions (including the receipt from one or more lenders of the additional commitment).

On June 26, 2006, the Company borrowed approximately $79,000 under the KeyBank Credit Agreement and used such funds to (i) pay fees and expenses associated with the KeyBank Credit Agreement and (ii) repay the approximately $78,000 balance outstanding under the Amended Credit Agreement. As of June 30, 2007, $38,000 was outstanding under the KeyBank Credit Agreement. The

8




Company recorded a non-cash pre-tax charge of approximately $3,576 in fiscal 2007 to write off deferred debt issuance costs associated with the early termination of the previous credit agreement. As of June 30, 2007, deferred financing fees of $863 associated with the KeyBank Credit Agreement have been recorded.

Approximately $22,846 of the KeyBank Credit Agreement is being utilized to provide letters of credit to secure RBCA’s obligations relating to certain Industrial Development Revenue Bonds (the “IRB’s”) and insurance programs. As of June 30, 2007, RBCA had the ability to borrow up to an additional $89,154 under the KeyBank Credit Agreement.

On December 8, 2003, Schaublin entered into a bank credit facility (the “Swiss Credit Facility”) with Credit Suisse providing for 10,000 Swiss francs, or approximately $8,138, of term loan (the “Swiss Term Loan”) and up to 2,000 Swiss francs, or approximately $1,628, of revolving credit loans and letters of credit (the “Swiss Revolving Credit Facility”). RBCA pledged 99.4% of the present and future share capital of Schaublin S.A. (1,366 shares) against this facility. On November 8, 2004, Schaublin amended the Swiss Credit Facility to increase the Swiss Revolving Credit Facility to 4,000 Swiss francs, or approximately $3,255. Borrowings under the Swiss Credit Facility bear interest at a floating rate of LIBOR plus 2.25%. As of June 30, 2007, there were no borrowings outstanding under the Swiss Credit Facility.

The balances payable under all borrowing facilities are as follows:

 

 

June 30,
2007

 

March 31,
2007

 

KeyBank Credit Agreement

 

 

 

 

 

 

 

Five-year senior secured revolving credit facility; amounts outstanding bear interest at the prime rate or LIBOR, plus a specified margin, depending on the type of borrowing being made (6.0625% at June 30, 2007)

 

$ 38,000

 

 

$ 42,000

 

 

Note Payable

 

750

 

 

750

 

 

Industrial Development Revenue Bonds

 

 

 

 

 

 

 

Series 1994 A, bears interest at a variable rate payable monthly through September 2017

 

7,700

 

 

7,700

 

 

Series 1994 B, bears interest at a variable rate, payable monthly through December 2017

 

3,000

 

 

3,000

 

 

Series 1998, bears interest at variable rates, payable monthly through December 2021.

 

1,155

 

 

1,155

 

 

Series 1999, bearing interest at variable rates, payable monthly through April 2024

 

4,800

 

 

4,800

 

 

Total Debt

 

55,405

 

 

59,405

 

 

Less: Current Portion

 

750

 

 

750

 

 

Long-Term Debt

 

$ 54,655

 

 

$ 58,655

 

 

 

The current portion of long-term debt as of June 30, 2007 and March 31, 2007 includes $750 note payable related to the All Power acquisition.

7.                 Income Taxes

The Company adopted the provisions of FIN 48 on April 1, 2007. As a result of its implementation, the Company recognized an increase in the liability for unrecognized tax benefits of approximately $230 and a reduction to the April 1, 2007 balance of retained earnings. The total amount of unrecognized tax benefits as of April 1, 2007, including the cumulative effect of the adoption of FIN 48, is $3,210, substantially all of which represents liabilities that, if recognized, would impact the effective tax rate. The

9




Company does not anticipate any material changes to its unrecognized tax benefits within the next 12 months.

The Company files income tax returns in the U.S. federal jurisdiction, and various states and foreign jurisdictions. With few exceptions, the Company is no longer subject to state or foreign income tax examinations by tax authorities for years ending before March 31, 2001. The Company is no longer subject to U.S. federal tax examination by the Internal Revenue Service for years ending before March 31, 2003.

The Company recognizes the interest and penalties accrued related to unrecognized tax benefits in income tax expense. The Company had approximately $72 of accrued interest and penalties at April 1, 2007.

The effective income tax rates for the three month periods ended June 30, 2007 and July 1, 2006 were 34.1% and 35.3%, respectively.

8.                 Pension and Postretirement Plans

The Company has noncontributory defined benefit pension plans covering union employees in its Heim division plant in Fairfield, Connecticut and its Plymouth subsidiary plant in Plymouth, Indiana.

Effective March 31, 2007, the pension plan for the Tyson subsidiary in Glasgow, Kentucky was curtailed in the terms of the Shutdown Agreement between Tyson Bearings Company, Inc. and the United Steelworkers of America (AFL-CIO) Local 7461-01 dated February 6, 2007. No further benefits will accrue against this Plan, and no new employees will become eligible for participation in the Plan. However, the Company will continue to maintain the Plan.

Effective May 1, 2006, the pension plan for the Nice subsidiary in Kulpsville, Pennsylvania was frozen in accordance with the terms of the Shutdown Agreement between RBC Nice Bearings, Inc. and the United Steelworkers of America (AFL-CIO) Local 6816-12 dated February 15, 2006. No further benefits will accrue against this plan, and no new employees will become eligible for participation in the plan. However, the Company will continue to maintain the plan. Net periodic benefit cost in the period ended July 1, 2006 included $100 related to the impact of the curtailment of this plan.

The following table illustrates the components of net periodic benefit cost for the Company’s pension benefits:

 

 

Pension Benefits
Three Months Ended

 

 

 

June 30,
2007

 

July 1,
2006

 

Components of net periodic benefit cost:

 

 

 

 

 

 

 

Service cost

 

 

$   69

 

 

$ 137

 

Interest cost

 

 

262

 

 

256

 

Expected return on plan assets

 

 

(340

)

 

(324

)

Amortization of prior service cost

 

 

2

 

 

2

 

Amortization of losses

 

 

18

 

 

53

 

Curtailment loss

 

 

 

 

100

 

Total net periodic benefit cost

 

 

$   11

 

 

$ 224

 

 

The postretirement medical and life insurance benefits for the Tyson subsidiary in Glasgow, Kentucky were curtailed in the terms of the Shutdown Agreement between Tyson Bearing Company, Inc. and the United Steelworkers of America (AFL-CIO) Local 7461-01 dated February 6, 2007.

Effective May 1, 2006, the postretirement medical and life insurance benefits for the Nice subsidiary in Kulpsville, Pennsylvania were frozen in the terms of the Shutdown Agreement between RBC Nice

10




Bearings, Inc. and the United Steelworkers of America (AFL-CIO) Local 6816-12 dated February 15, 2006. No further benefits will become eligible for participation in the plan. Life insurance benefits terminated July 31, 2006. Postretirement medical benefits will be available until the contract expires on January 31, 2008. Net periodic benefit cost in the period ended July 1, 2006 included $182 related to the impact of the curtailment of this plan.

The following table illustrates the components of net periodic benefit cost for the Company’s other postretirement benefits:

 

 

Other
Postretirement
Benefits
Three Months
Ended

 

 

 

June 30,
    2007    

 

July 1,
    2006    

 

Components of net periodic benefit cost:

 

 

 

 

 

 

 

 

 

Service cost

 

 

$ 12

 

 

 

$ 33

 

 

Interest cost

 

 

38

 

 

 

54

 

 

Prior service cost amortization

 

 

(7

)

 

 

(31

)

 

Amount of loss recognized

 

 

10

 

 

 

16

 

 

Curtailment loss

 

 

 

 

 

182

 

 

Total net periodic benefit cost

 

 

$ 53

 

 

 

$ 254

 

 

 

9.                 Reportable Segments

The Company operates through operating segments for which separate financial information is available, and for which operating results are evaluated regularly by the Company’s chief operating decision maker in determining resource allocation and assessing performance. Those operating segments with similar economic characteristics and that meet all other required criteria, including nature of the products and production processes, distribution patterns and classes of customers, are aggregated as reportable segments. Certain other operating segments do not exhibit the common attributes mentioned above and do not meet the quantitative thresholds for separate disclosure, and their information is combined and disclosed as “Other.” There is also a segment reflecting corporate charges.

The Company has four reportable business segments engaged in the manufacture and sale of the following:

Roller Bearings.   Roller bearings are anti-friction bearings that use rollers instead of balls. The Company manufactures four basic types of roller bearings: heavy duty needle roller bearings with inner rings, tapered roller bearings, track rollers and aircraft roller bearings.

Plain Bearings.   Plain bearings are produced with either self-lubricating or metal-to-metal designs and consist of several sub-classes, including rod end bearings, spherical plain bearings and journal bearings. Unlike ball bearings, which are used in high-speed rotational applications, plain bearings are primarily used to rectify inevitable misalignments in various mechanical components.

Ball Bearings.   The Company manufactures four basic types of ball bearings: high precision aerospace, airframe control, thin section and commercial ball bearings which are used in high-speed rotational applications.

Other.   Other consists of two minor operating locations that do not fall into the above segmented categories. The Company produces precision ground ball bearing screws at its Linear Precision Products (LPP) plant that offer repeatable positioning accuracy in machine tools, transfer lines, robotic handling

11




and semiconductor equipment. The Company’s Schaublin location produces precision machine tool collets that provide effective part holding and accurate part location during machining operations.

Corporate.   Corporate consists of expenses incurred at the corporate office.

Segment performance is evaluated based on segment net sales and operating income. Items not allocated to segment operating income include corporate administrative expenses and certain other amounts.

 

 

Three Months Ended

 

 

 

June 30,
2007

 

July 1,
2006

 

Net External Sales

 

 

 

 

 

Roller

 

$ 23,643

 

$ 24,241

 

Plain

 

37,720

 

34,029

 

Ball

 

13,421

 

12,162

 

Other

 

5,039

 

4,799

 

 

 

$ 79,823

 

$ 75,231

 

Operating Income

 

 

 

 

 

Roller

 

$ 7,219

 

$ 6,148

 

Plain

 

10,045

 

9,099

 

Ball

 

3,457

 

2,931

 

Other

 

617

 

811

 

Corporate

 

(5,557

)

(5,491

)

 

 

$ 15,781

 

$ 13,498

 

Geographic External Sales

 

 

 

 

 

Domestic

 

$ 68,253

 

$ 65,431

 

Foreign

 

11,570

 

9,800

 

 

 

$ 79,823

 

$ 75,231

 

Intersegment Sales

 

 

 

 

 

Roller

 

$ 2,156

 

$ 2,024

 

Plain

 

269

 

270

 

Ball

 

1,576

 

1,002

 

Other

 

4,370

 

3,546

 

 

 

$ 8,371

 

$ 6,842

 

 

All intersegment sales are eliminated in consolidation.

10.          Restructuring of Operations

In January 2007, the Company began the consolidation of its tapered bearing manufacturing capacity. The Company has discontinued manufacturing tapered bearings in its Glasgow, Kentucky facility and has consolidated the remaining manufacturing into other Company manufacturing facilities. The consolidation is anticipated to result in improved gross margin over the next twelve months. This consolidation resulted in a charge of approximately $5,088 in fiscal 2007. Approximately $2,211 of this charge related to the non-cash disposal of fixed assets. As of March 31, 2007, the remaining charge of $2,877 included termination benefits of approximately $1,153, moving costs of approximately $755, rent of approximately $628 and cleanup and turnover costs of approximately $250, of which $1,984 was paid in fiscal 2007. At March 31, 2007, the balance of $893 was included in accrued liabilities. During the quarter ended June 30, 2007, the Company paid $847, leaving an accrual of $46 which is expected to be paid in the second quarter.

12




11.          Subsequent Event

On July 25, 2007, the Company acquired the assets of CBS/Coastal Bearing Services (“CBS”) for approximately $3.7 million in cash. CBS, located in Houston, Texas, manufactures, inspects and refurbishes large bearings for the oil and mining industries, as well as other general industrial applications with sizes ranging up to 124 inches in diameter. CBS generated revenues of approximately $3.1 million for the year ended December 30, 2006. The financial results of CBS will be reported as part of the Company’s Ball Bearings segment.

13




ITEM 2.                Management’s Discussion and Analysis of Financial Condition and Results of Operations

Cautionary Statement As To Forward-Looking Information

The information in this discussion contains “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934 which are subject to the “safe harbor” created by those sections. All statements other than statements of historical facts, included in this quarterly report on Form 10-Q regarding our strategy, future operations, future financial position, future revenues, projected costs, prospects and plans and objectives of management are “forward-looking statements” as the term is defined in the Private Securities Litigation Reform Act of 1995.

The words “anticipates,” “believes,” “estimates,” “expects,” “intends,” “may,” “plans,” “projects,” “will,” “would” and similar expressions are intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words. We may not actually achieve the plans, intentions or expectations disclosed in our forward-looking statements and you should not place undue reliance on our forward-looking statements. Actual results or events could differ materially from the plans, intentions and expectations disclosed in the forward-looking statements that we make. These forward-looking statements involve risks and uncertainties that could cause our actual results to differ materially from those in the forward-looking statements, including, without limitation, the risks identified under the heading “Risk Factors” set forth in the our Annual Report on Form 10-K for the year ended March 31, 2007 and other filings made with the Securities and Exchange Commission. Our forward-looking statements do not reflect the potential impact of any future acquisitions, mergers, dispositions, joint ventures or investments we may make. We do not intend, and undertake no obligation, to update or alter any forward-looking statement. The following section is qualified in its entirety by the more detailed information, including our financial statements and the notes thereto, which appears elsewhere in this Quarterly Report.

Overview

We are a well known international manufacturer of highly engineered precision plain, roller and ball bearings. Our precision solutions are integral to the manufacture and operation of most machines and mechanical systems, reduce wear to moving parts, facilitate proper power transmission and reduce damage and energy loss caused by friction. While we manufacture products in all major bearing categories, we focus primarily on the higher end of the bearing market where we believe our value added manufacturing and engineering capabilities enable us to differentiate ourselves from our competitors and enhance profitability. We have been providing bearing solutions to our customers since 1919. Over the past ten years, under the leadership of our current management team, we have significantly broadened our end markets, products, customer base and geographic reach. We currently operate 18 manufacturing facilities in four countries.

Demand for bearings generally follows the market for products in which bearings are incorporated and the economy as a whole. Purchasers of bearings include industrial equipment and machinery manufacturers, producers of commercial and military aerospace equipment such as missiles and radar systems, agricultural machinery manufacturers, construction and specialized equipment manufacturers and automotive and commercial truck manufacturers. The markets for our products are cyclical, and general market conditions could negatively impact our operating results. We have endeavored to mitigate the cyclicality of our product markets by entering into sole-source relationships and long-term purchase orders, through diversification across multiple market segments within the aerospace and defense and diversified industrial segments, by increasing sales to the aftermarket and by focusing on developing highly customized solutions.

14




Outlook

Backlog, as of June 30, 2007, was $185.0 million versus $167.5 million as of July 1, 2006. We continue to see positive momentum from the diversified industrial, aerospace and defense markets. Management believes that operating cash flows and available credit under the credit facility will provide adequate resources to fund internal and external growth initiatives for the foreseeable future.

Results of Operations

The following table sets forth the various components of our consolidated statements of operations, expressed as a percentage of net sales, for the periods indicated that are used in connection with the discussion herein.

 

 

Three Months Ended

 

 

 

June 30,
2007

 

July 1,
2006

 

Statement of Operations Data:

 

 

 

 

 

 

 

Net sales

 

 

100.0

%

 

100.0

%

Gross margin

 

 

34.4

 

 

31.2

 

Selling, general and administrative

 

 

14.2

 

 

12.8

 

Other, net

 

 

0.4

 

 

0.5

 

Operating income

 

 

19.8

 

 

17.9

 

Interest expense, net

 

 

1.1

 

 

2.9

 

Loss on early extinguishment of debt

 

 

 

 

4.7

 

Income before income taxes

 

 

18.7

 

 

10.3

 

Provision for income taxes

 

 

6.4

 

 

3.6

 

Net income

 

 

12.3

 

 

6.7

 

 

Three Month Period Ended June 30, 2007 Compared to Three Month Period Ended July 1, 2006

Net Sales.   Net sales for the three month period ended June 30, 2007 were $79.8 million, an increase of $4.6 million, or 6.1%, compared to $75.2 million for the same period in the prior year. During the three month period ended June 30, 2007, we experienced net sales growth in three of our four segments, driven by demand across our end markets as well as our continued efforts to supply new products to existing and new customers. Net sales to aerospace and defense customers grew 19.1% in the first quarter of fiscal 2008 compared to the same period last year, driven mainly by commercial and military aerospace aftermarket and OEM demand. Our net sales to our diversified industrial customers declined 5.4% in the first quarter of fiscal 2008 compared to the same period last year. Reflected in this change, our core markets of construction, mining, semiconductor capital equipment and general industrial distribution grew 3.9%, offset by a decrease in year-over-year volume in our class 8 truck aftermarket business.

The Plain Bearings segment achieved net sales of $37.7 million for the three month period ended June 30, 2007, an increase of $3.7 million, or 10.8%, compared to $34.0 million for the same period in the prior year. The commercial and military aerospace market grew $4.8 million due to an increase in airframe and aerospace bearing shipments to aircraft manufacturers and continued demand for aftermarket product. This was offset by a $1.1 million decline in net sales to our diversified industrial customers. This decline was mainly due to a shift in manufacturing capacity to aerospace and lower OEM volume.

The Roller Bearings segment achieved net sales of $23.6 million for the three month period ended June 30, 2007, a decrease of $0.6 million, or 2.5%, compared to $24.2 million for the same period in the prior year. Net sales to the class 8 truck OEM and aftermarket declined by $3.4 million, offset by an increase of $2.8 million in aerospace applications, general industrial demand and the inclusion of Phoenix, which accounted for $0.9 million of net sales for the period ended June 30, 2007.

15




The Ball Bearings segment achieved net sales of $13.4 million for the three month period ended June 30, 2007, an increase of $1.2 million, or 10.4%, compared to $12.2 million for the same period in the prior year. Of this increase, $0.8 million was driven principally by increased defense-related demand. Sales to our customers in the industrial market increased $0.4 million compared to the same period last fiscal year.

The Other segment, which is focused mainly on the sale of precision ball screws and machine tool collets, achieved net sales of $5.0 million for the three month period ended June 30, 2007, an increase of $0.2 million, or 5.0%, compared to $4.8 million for the same period last year. This increase was primarily due to increased sales of machine tool collets in Europe.

Gross Margin.   Gross margin was $27.4 million, or 34.4% of net sales, for the three month period ended June 30, 2007, versus $23.5 million, or 31.2% of net sales, for the comparable period in fiscal 2007. The increase in our gross margin as a percentage of net sales was primarily the result of an overall increase in volume, a shift in mix toward higher margin products, and increased manufacturing efficiency.

Selling, General and Administrative.   SG&A expenses increased by $1.7 million, or 17.4%, to $11.3 million for the three month period ended June 30, 2007 compared to $9.6 million for the same period in fiscal 2007. As a percentage of net sales, SG&A increased to 14.2% for the three month period ended June 30, 2007 compared to 12.8% for the same period in fiscal 2007. The increase of $1.7 million was due to additional personnel necessary to support our increased volume, the inclusion of Phoenix, and $0.4 million of stock compensation expense.

Other, net.   Other, net for the three month period ended June 30, 2007 of $0.4 million was flat with the comparable period in fiscal 2007. For the three month period ended June 30, 2007, other, net consisted of $0.2 million of amortization of intangibles and $0.2 million of other expenses. For the three month period ended July 1, 2006, other, net included $0.2 million of plant shutdown expenses related to our RBC Nice Bearings, Inc. plant consolidation and $0.2 million of amortization of intangibles.

Operating Income.   Operating income was $15.8 million, or 19.8% of net sales, for the three month period ended June 30, 2007 compared to $13.5 million, or 17.9% of net sales, for the three month period ended July 1, 2006. Operating income for the Plain Bearings segment was $10.0 million for the three month period ended June 30, 2007, or 26.6% of net sales, compared to $9.1 million for the same period last year, or 26.7% of net sales. Our Roller Bearings segment achieved an operating income for the three month period ended June 30, 2007 of $7.2 million, or 30.5% of net sales, compared to $6.1 million, or 25.4% of net sales, for the three month period ended July 1, 2006. Our Ball Bearings segment achieved an operating income of $3.5 million, or 25.8% of net sales, for the three month period ended June 30, 2007, compared to $2.9 million, or 24.1% of net sales, for the same period in fiscal 2007. Our Other segment achieved an operating income of $0.6 million, or 12.2% of net sales, for the three month period ended June 30, 2007, compared to $0.8 million, or 16.9% of net sales, for the same period in fiscal 2007. The increase in operating income in three of our four segments was driven primarily by a shift in mix toward higher margin products and increased manufacturing efficiency. In addition, our operating income as a percentage of net sales increased in two of our four segments as a result of leveraging our fixed cost base.

Interest Expense, net.   Interest expense, net decreased by $1.3 million, or 59.9%, to $0.9 million in the three month period ended June 30, 2007, compared to $2.2 million in the same period last fiscal year. Amortization of deferred financing costs and debt discount are recorded as a component of net interest expense. Amortization expenses included in interest expense, net were $0.1 million for the three month period ended June 30, 2007 compared to $0.2 million for the three month period ended July 1, 2006.

Loss on Early Extinguishment of Debt.   For the three month period ended July 1, 2006, loss on extinguishment of debt was $3.6 million for the non-cash write-off of deferred debt issuance costs associated with the early termination of the previous credit facility.

16




Income Before Income Taxes.   Income before taxes increased by $7.1 million, to $14.9 million for the three month period ended June 30, 2007 compared to $7.8 million for the three month period ended July 1, 2006.

Income Taxes.   Income tax expense for the three month period ended June 30, 2007 was $5.1 million compared to $2.7 million for the three month period ended July 1, 2006. Our effective income tax rate for the three month period ended June 30, 2007 was 34.1% compared to 35.3% for the three month period ended July 1, 2006.

Net Income.   Net income increased by $4.8 million to $9.8 million for the three month period ended June 30, 2007 compared to $5.0 million for the three month period ended July 1, 2006.

Liquidity and Capital Resources

Liquidity

On June 15, 2007, our board of directors authorized us to repurchase up to $10.0 million of our common stock from time to time on the open market, through block trades, or in privately negotiated transactions depending on market conditions, alternative uses of capital and other factors. Purchases may be commenced, suspended or discontinued at any time without prior notice. The new program, which does not have an expiration date, replaces a $7.5 million program that expired on March 31, 2007. As of June 30, 2007, no repurchases have been made under the new program.

On April 18, 2006, pursuant to a purchase agreement with Merrill Lynch & Co., Merrill Lynch, Pierce, Fenner & Smith Incorporated, KeyBanc Capital Markets and Robert W. Baird & Co., we, along with certain of our stockholders, sold 8,989,550 shares of our common stock (5,995,529 sold by certain of our stockholders). The offering yielded us aggregate net proceeds of approximately $57.8 million after payment of the underwriting discount, commissions and offering expenses. The full amount of the net proceeds was used to prepay outstanding balances under the previous credit agreement.

On June 26, 2006, RBC terminated its previous credit agreement, and the related credit, security and ancillary agreements, and entered into a credit agreement (the “KeyBank Credit Agreement”) and related security and guaranty agreements with certain banks, KeyBank National Association, as Administrative Agent, and J.P. Morgan Chase Bank, N.A. as Co-Lead Arrangers and Joint Lead Book Runners. The KeyBank Credit Agreement provides us with a $150.0 million five-year senior secured revolving credit facility which can be increased by up to $75.0 million, in increments of $25.0 million, under certain circumstances and subject to certain conditions (including the receipt from one or more lenders of the additional commitment).

Amounts outstanding under the KeyBank Credit Agreement generally bear interest at the prime rate, or LIBOR plus a specified margin, depending on the type of borrowing being made. The applicable margin is based on our consolidated ratio of net debt to adjusted EBITDA from time to time. Currently, our margin is 0.0% for prime rate loans and 0.75% for LIBOR rate loans. Amounts outstanding under the KeyBank Credit Agreement are due and payable on its expiration date (June 24, 2011). We may elect to prepay some or all of the outstanding balance from time to time without penalty.

17




On December 8, 2003, Schaublin entered into a bank credit facility (the “Swiss Credit Facility”) with Credit Suisse providing for 10.0 million Swiss francs, or approximately $8.1 million, of term loan (the “Swiss Term Loan”) and up to 2.0 million Swiss francs, or approximately $1.6 million, of revolving credit loans and letters of credit (the “Swiss Revolving Credit Facility”). RBCA pledged 99.4% of the present and future share capital of Schaublin S.A. (1,366 shares) against this facility. On November 8, 2004, Schaublin amended the Swiss Credit Facility to increase the Swiss Revolving Credit Facility to 4.0 million Swiss francs, or approximately $3.3 million. Borrowings under the Swiss Credit Facility bear interest at a floating rate of LIBOR plus 2.25%. As of June 30, 2007, there were no borrowings outstanding under the Swiss Credit Facility.

Cash Flows

Three Month Period Ended June 30, 2007 Compared to the Three Month Period Ended July 1, 2006

In the three month period ended June 30, 2007, we generated cash of $13.4 million from operating activities compared to $12.9 million for the three month period ended July 1, 2006. The increase of $0.5 million was mainly a result of an increase in net income of $4.8 million offset by a change in operating assets and liabilities and lower non-cash charges, totaling $4.3 million.

Cash used for investing activities for the three month period ended June 30, 2007 included $6.6 million related to capital expenditures compared to $2.6 million for the three month period ended July 1, 2006. Investing activities in fiscal 2008 also included $4.4 million related to the acquisition of Phoenix.

Financing activities used $3.0 million in the three month period ended June 30, 2007, primarily driven by $4.0 million in cash used to pay down debt outstanding under our KeyBank Credit Agreement offset by $1.0 million proceeds from the exercise of stock options.

Capital Expenditures

Our capital expenditures were $6.6 million for the three month period ended June 30, 2007. We expect to make capital expenditures of approximately $13.0 to $17.0 million during fiscal 2008 in connection with our existing business. We intend to fund our fiscal 2008 capital expenditures principally through existing cash, internally generated funds and borrowings under our KeyBank Credit Agreement. We may also make substantial additional expenditures in connection with acquisitions.

Obligations and Commitments

As of June 30, 2007, there was no material change in debt and interest, capital lease, operating lease or pension and postretirement obligations as compared to such obligations and liabilities as of March 31, 2007.

ITEM 3.                Quantitative and Qualitative Disclosures About Market Risk

Quantitative and Qualitative Disclosure About Market Risk

We are exposed to market risks, which arise during the normal course of business from changes in interest rates and foreign currency exchange rates.

Interest Rates.   We are exposed to market risk from changes in the interest rates on a significant portion of our outstanding indebtedness. Outstanding balances under our KeyBank Credit Agreement generally bear interest at the prime rate or LIBOR (the London inter-bank offered rate for deposits in U.S. dollars for the applicable LIBOR period) plus a specified margin, depending on the type of borrowing being made. The applicable margin is based on our consolidated ratio of net debt to adjusted EBITDA

18




from time to time. As of June 30, 2007, our margin is 0.0% for prime rate loans (prime rate at June 30, 2007 was 8.25%) and 0.75% for LIBOR rate loans (one month LIBOR rate at June 30, 2007 was 5.3%). As of June 30, 2007, based on the aggregate amount of $38.0 million outstanding under our KeyBank Credit Agreement, a 100 basis point change in interest rates would have changed our interest expense by approximately $0.4 million per year.

Interest rate fluctuations affect the fair market value of our fixed rate debt, but with respect to such fixed rate instruments, do not impact our earnings or cash flow.

Foreign Currency Exchange Rates.   As a result of increased sales in Europe, our exposure to risk associated with fluctuating currency exchange rates between the U.S. dollar, the Euro, the Swiss Franc and the British Pound has increased. Our Swiss operations utilize the Swiss Franc as the functional currency, our French operations utilize the Euro as the functional currency and our English operations utilize the British Pound as the functional currency. Foreign currency transaction gains and losses are included in earnings. Approximately 14% of our net sales were denominated in foreign currencies in the first quarter of 2008. We expect that this proportion is likely to increase as we seek to increase our penetration of foreign markets, particularly within the aerospace and defense markets. Foreign currency transaction exposure arises primarily from the transfer of foreign currency from one subsidiary to another within the group, and to foreign currency denominated trade receivables. Unrealized currency translation gains and losses are recognized upon translation of the foreign subsidiaries’ balance sheets to U.S. dollars. Because our financial statements are denominated in U.S. dollars, changes in currency exchange rates between the U.S. dollar and other currencies have had, and will continue to have, an impact on our earnings. We currently do not have exchange rate hedges in place to reduce the risk of an adverse currency exchange movement. Although currency fluctuations have not had a material impact on our financial performance in the past, such fluctuations may materially affect our financial performance in the future. The impact of future exchange rate fluctuations on our results of operations cannot be accurately predicted.

Off-Balance Sheet Arrangements

We have no off-balance sheet arrangements.

ITEM 4.                Controls and Procedures

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”)) as of June 30, 2007. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that, as of June 30, 2007, our disclosure controls and procedures were (1) designed to ensure that information relating to our Company required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported to our Chief Executive Officer and Chief Financial Officer within the time periods specified in the rules and forms of the U.S. Securities and Exchange Commission, and (2) effective, in that they provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.

Changes in Internal Control over Financial Reporting

No change in our internal control over financial reporting occurred during the three month period ended June 30, 2007 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act).

19




Limitation on Effectiveness of Controls

It should be noted that any system of controls, however well designed and operated, can provide only reasonable, and not absolute, assurance that the objectives of the system are met. The design of any control system is based, in part, upon the benefits of the control system relative to its costs. Control systems can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. In addition, over time, controls may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of these and other inherent limitations of control systems, there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions, regardless of how remote.

20




Part II—OTHER INFORMATION

ITEM 1.                Legal Proceedings

From time to time, we are involved in litigation and administrative proceedings which arise in the ordinary course of our business. We do not believe that any litigation or proceeding in which we are currently involved, either individually or in the aggregate, is likely to have a material adverse effect on our business, financial condition, operating results, cash flow or prospects.

ITEM 1A.        Risk Factors

There have been no material changes to our risk factors and uncertainties during the three month period ended June 30, 2007. For a discussion of the Risk Factors, refer to Part I, Item 1A, “Risk Factors,” contained in the Company’s Annual Report on Form 10-K for the period ended March 31, 2007.

ITEM 2.                Unregistered Sales of Equity Securities and Use of Proceeds

Unregistered Sales of Equity Securities

None.

Use of Proceeds

Not applicable.

ITEM 3.                Defaults Upon Senior Securities

Not applicable.

ITEM 4.                Submission of Matters to a Vote of Security Holders

Not applicable.

ITEM 5.                Other Information

Not applicable.

ITEM 6.                Exhibits

Exhibit
Number

 

 

 

Exhibit Description

10.1

 

Credit Agreement, dated as of June 26, 2006 by and between RBC Bearings Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.1 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.

10.2

 

Parent Guaranty, dated June 26, 2006, by and between RBC Bearings Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.2 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.

10.3

 

Security Agreement, dated June 26, 2006, by and between Roller Bearing Company of America, Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.3 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.

31.01

 

Certification of Chief Executive Officer Pursuant to Securities Exchange Act Rule 13a-14(a).

31.02

 

Certification of Chief Financial Officer Pursuant to Securities Exchange Act Rule 13a-14(a).

21




 

32.01

 

Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*

32.02

 

Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*


*                    This certification accompanies this Quarterly Report on Form 10-Q, is not deemed filed with the SEC and is not to be incorporated by reference into any filing of the Company under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended (whether made before or after the date of this Quarterly Report on Form 10-Q), irrespective of any general incorporation language contained in such filing.

22




SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

RBC BEARINGS INCORPORATED

 

 

 

(Registrant)

 

 

By:

 

/s/ Dr. MICHAEL J. HARTNETT

 

 

 

Name:

Dr. Michael J. Hartnett

 

 

 

Title:

Chief Executive Officer

 

 

 

Date:

August 9, 2007

 

By:

 

/s/ DANIEL A. BERGERON

 

 

 

Name:

Daniel A. Bergeron

 

 

 

Title:

Chief Financial Officer

 

 

 

Date:

August 9, 2007

 

23




EXHIBIT INDEX

Exhibit
Number

 

Exhibit Description

10.1

 

Credit Agreement, dated as of June 26, 2006 by and between RBC Bearings Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.1 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.

10.2

 

Parent Guaranty, dated June 26, 2006, by and between RBC Bearings Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.2 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.

10.3

 

Security Agreement, dated June 26, 2006, by and between Roller Bearing Company of America, Incorporated and KeyBank National Association, as Administrative Agent and Lender filed as Exhibit 99.3 on Form 8-K dated July 18, 2006 is hereby incorporated by reference herein.

31.01

 

Certification of Chief Executive Officer Pursuant to Securities Exchange Act Rule 13a-14(a).

31.02

 

Certification of Chief Financial Officer Pursuant to Securities Exchange Act Rule 13a-14(a).

32.01

 

Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*

32.02

 

Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350 and Securities Exchange Act Rule 13a-14(b).*

 


*                    This certification accompanies this Quarterly Report on Form 10-Q, is not deemed filed with the SEC and is not to be incorporated by reference into any filing of the Company under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended (whether made before or after the date of this Quarterly Report on Form 10-Q), irrespective of any general incorporation language contained in such filing.

24



Exhibit 31.01

CERTIFICATION OF CHIEF EXECUTIVE OFFICER
PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

I, Dr. Michael J. Hartnett, certify that:

1.                 I have reviewed this quarterly report on Form 10-Q of RBC Bearings Incorporated;

2.                 Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.                 Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.                 The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a)               designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including any consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

b)              designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles; and

c)               evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

d)              disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.                 The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

a)               all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

b)              any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: August 9, 2007

By:

/s/ Dr. MICHAEL J. HARTNETT

 

 

Dr. Michael J. Hartnett

 

 

President and Chief Executive Officer

 

1



Exhibit 31.02

CERTIFICATION OF CHIEF FINANCIAL OFFICER
PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

I, Daniel A. Bergeron, certify that:

1.                 I have reviewed this quarterly report on Form 10-Q of RBC Bearings Incorporated;

2.                 Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.                 Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.                 The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a)               designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including any consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

b)              designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles; and

c)               evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

d)              disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.                 The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

a)               all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

b)              any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: August 9, 2007

By:

/s/ DANIEL A. BERGERON

 

 

Daniel A. Bergeron

 

 

Chief Financial Officer

 

1



Exhibit 32.01

CERTIFICATION OF CHIEF EXECUTIVE OFFICER
PURSUANT TO
18 U.S.C SECTION 1350

The undersigned, Dr. Michael J. Hartnett, the President and Chief Executive Officer of RBC Bearings Incorporated (the “Company”), pursuant to 18 U.S.C. §1350, hereby certifies that:

(i)            the Quarterly Report on Form 10-Q for the period ended June 30, 2007 of the Company (the “Report”) fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

(ii)        the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

Dated: August 9, 2007

 

/s/ DR. MICHAEL J. HARTNETT

 

Dr. Michael J. Hartnett

 

President and Chief Executive Officer

 

1



Exhibit 32.02

CERTIFICATION OF CHIEF FINANCIAL OFFICER
PURSUANT TO
18 U.S.C. SECTION 1350

The undersigned, Daniel A. Bergeron, Chief Financial Officer, of RBC Bearings Incorporated (the “Company”), pursuant to 18 U.S.C. §1350, hereby certifies:

(i)            the Quarterly Report on Form 10-Q for the period ended June 30, 2007 of the Company (the “Report”) fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

(ii)        the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

Dated: August 9, 2007

 

 

/s/ DANIEL A. BERGERON

 

Daniel A. Bergeron

 

Chief Financial Officer

 

1